Used robots in 28 Bremen, Germany

Weight compensation robot from KUKA – GA2-D2 KR125/3 30449

• Manufacturer: Kuka

Industrial robot, robot, weight balance Manufacturer: KUKA, counterbalance from robot KR125/3 | Type: GA2-D2 | Location hole: Ø 54 mm, distance 620 mm | Techn. data: see photos | Dimension: 760/220/H290 mm | Mass...

Robot cross table from Berger Lahr - x/y/z 670/360/1260 mm 30212

• Manufacturer: Berger Lahr

Industrial robot, robot, robotics, servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor

Robots from Manutec - r2 5059

• Manufacturer: Manutec

Industrial robots, robots Payload: 2 kg | Control: Siemens RCM | Max. workspace: 800 mm | Tare weight: 670 kg | Mass: 670 | Internal storage: Hall 5

2003 Computer robot control from KUKA – K C2 (V)KR C2 31654

• Manufacturer: Kuka

Position computer, computer, control unit, robot controller, controller

KUKA Kr220-2000 R2700 extra Vkrc2 Industrial Robot

• Manufacturer: Kuka

robot: Kr220-2000 R2700 Axles: 6 Load capacity: 210 kg Reach: 2700 mm Control: Vkrc2 Serial Number: 623921 accessories: Control cable Power cable Control panel

2018 ROBOJOB Fanuc M20iA

• Manufacturer: Fanuc
• Model: M-20iA

Type: Placement system Weight: 120 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - Robojob Mill-Assist: - Raw part handling - S...

1985 GMF Fanuc S360R

• Manufacturer: Fanuc
• Load capacity: 60 kilogram

Condition: Very good. Control: Fanuc | Load capacity: 60 kg | Additional information: Load capacity at wrist mounting surface and at maximum speed and extension is 60 kg.

2022 Kuka (Nownology) KR240PA

• Manufacturer: Kuka
• Model: KR 240

Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a mic...

1999 Kuka KR 200/1 mit KR C1

• Manufacturer: Kuka
• Model: KR 200

Overview This robot-palletizer was built in 1999 from German manufacturer Kuka. The machine was running until January 2025 and is now stored in the company. Technical Details Capacity Approx 150 layers per hour (...

Workbench

Approx. dimensions: 700 x 2,000 x 850 mm, excl. contents/ bench drill Net surcharge value excluding VAT; sold on behalf of a public law institution (AöR); our surcharge of 18% is subject to VAT, as a taxable serv...

Workbench

incl. vice, excl. contents/items shown in the photo, dimensions approx.: 800 x 2,500 x 850 mm Net surcharge value excluding VAT; sold on behalf of a public law institution (AöR); our surcharge of 18% is subject t...

Robot 500 + AVS811

• Manufacturer: Vemag
• Model: ROBOT 500

VEMAG ROBOT 500 + AVS811 - As New condition, very low working hours (1200) - Standard 110ltr hopper - Touch Screen Control - Cutting device VEMAG AVS811 Pneumatic cutting device For the processing of a wide range...

Measuring adapter from Reis Robotics – XMC20 2364687 30951

• Manufacturer: Reis Robotics

PLC expansion module, switchgear, control, marshalling module, PCB module, measuring adapter -Type: XMC20 : 2364687

Servo controller from Reis Robotics - Drive 4025 AT 30868

• Manufacturer: Reis Robotics

Servo drive, control, converter frequency converter, drive inverter, compact inverter, drive controller, control unit