Used pull type in 14 Brandenburg, Germany

WMW MEUSELWITZ RWI 10

• Manufacturer: WMW

WMW-Meuselwitz RWI 10 Max. ram stroke: approx. 1320 mm Max. tool diameter: 90 mm Max. workpiece diameter: 400 mm Cutting length: approx. 850 mm Cutting width: approx. 30 mm Cutting depth: approx. 40 mm Max. pulli...

WMW STO 150

• Manufacturer: WMW

Slotting machine WMW Suhl Max. groove width: 4-6 mm (8 mm with pre-pushing possible) used, tested ! space requirement: 1000 x 1000 x 2000mm

ROSCHER & EICHLER ST 3

• Manufacturer: Roscher & Eichler
• Model: ST 3

Control type: conventional | Freight basis: from camp Jena | Ram stroke - max.: 220 mm | Discharge: mm | Table diameter: mm | Total power requirement: 1,5 kW | Machine weight approx.: 880 kg | Space requirement ...

ROSCHER & EICHLER ST 3

• Manufacturer: Roscher & Eichler
• Model: ST 3

Control type: conventional | Freight basis: from stock Zschepplin | Ram stroke - max.: 220 mm | Discharge: mm | Table diameter: mm | Total power requirement: 1,5 kW | Machine weight approx.: 880 kg | Space requi...

Vertical slotting machine

Vertical pressure broaching machine H6 and H7 available With centers and pressure pins With 3 base plates

USSR 7A420

• Manufacturer: USSR

Max. 20 mm slot width Slot depth adjustable with feed Joint length: 200 mm Table travel X x Y: 500 x 400 mm Table - ram: 320 mm

2013 BVL V-Mix 36 3S plus

• Manufacturer: BVL - Van Lengerich
• Model: V-Mix

V-Mix 36 3S plus Tandem axle PTO shaft 25 km/h Category: Mixer feeders | Affectionate supply: Zugmaul | Design type: pulled

2011 BVL V-Mix 18 2S feed mixer wagon

• Manufacturer: BVL - Van Lengerich
• Model: V-Mix

Category: Mixer feeders | Affectionate supply: Zugmaul | Design type: pulled | Feed discharge: both sides

2001 electric pallet truck 1000 kg #B17267

• Manufacturer: Jungheinrich

Electric pallet truck, Ameise, Electric pallet stacker Used. Type HC 10 G56 115 80E Load capacity 1000 kg Lifting height approx. 890 mm Integrated charger (charges via standard power outlet) Hand pulling, electri...

2001 electric high lift truck defective 1000 kg #B17266

• Manufacturer: Jungheinrich

Electric pallet truck, Ameise, Electric pallet stacker Used. Type HC 10 G56 115 80E Load capacity 1000 kg Lifting height approx. 890 mm Integrated charger (charges via standard power outlet) Hand pulling, electri...

Marel Compact Grader CG60

• Manufacturer: Marel
• Model: CG60

Used Marel compact grader: The Compact Grader CG60 grades product pieces up to 40cm long and 25cm wide into a maximum of 6 different grades. As the pieces move along the grader, the system’s sturdy arms quickly s...

Schöma Shunting Robot Machinery

• Manufacturer: Schöma

other other Machines and aggregates Z. There is currently no valid time limit according to EBOA. The vehicle was inspected by a railroad expert in 02/2019. It was determined that all functions relevant for a main...