Used processing in Switzerland

DRYING CUPBOARD “SALVIS” TYPE 240

• Manufacturer: Salvis

240° – 220V – 600W ; . Ø360 x 275 mm

SHELL MILL HOLDER “EROGLU” DIN 69871 ISO40 A Ø16 L130 S

for cutters with driving slot – shape A – Ø 16 – L130

2015 HS AUTOMATION MS41OL Ref No: 45513

• Manufacturer: HS AUTOMATION

- Hydraulic spreading process - Reel drive three-phase motor - Tape loop control Pull-off via preset pressure or via loop control - Coil stop arms 6 pieces with quick clamping system - Protective device against t...

2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

• Manufacturer: Arku

Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

2003 AMT AHDR 500/1600 Ref No: 43445

• Manufacturer: AMT
• Model: AHDR 5001600

- Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

1999 KOHLER 50.140/21-3000.1VSRM + HK Ref No: 46805

• Manufacturer: Kohler

KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

LASA LR6-200DL Ref No: 48420

• Manufacturer: Lasa

Object: 48420 | Feed velocity max.: 18 m/min | Sheet width max.: 153 mm | Coil weight max.: 0.5 to | Max. diameter of coil: 1000 mm | Sheet thickness max.: 1.5 mm | Number of leveller rolls: 7 | Total power...

2005 ARKU RM 50X/9 ECOPLAN Ref No: 43890

• Manufacturer: Arku

Coil line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU RM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-to-length s...

1989 ARKU RM 5035.4/21 Ref No: 42744

• Manufacturer: Arku

Line consisting of + Uncoiler ARKU AH4000/MSG-4Q + insert attachment ARKU + precision leveller ARKU RM 5035 4/21 + band loop ARKU levelling capacity according to diagram

URSCHEL SLICER

• Manufacturer: Urschel

1 x Urschel E Tran slicer Year: 2020 Only 13 hours on the machine Previously was going to be used to slice bread chips, but can be used for veg etc... Located in Switzerland

1983 SMT MV20 BL5022 Ref No: 42997

• Manufacturer: SMT

Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx....

2010 PLASMATOME 20 MPC Ref No: 51131

• Manufacturer: PLASMATOME

The plasma is in operation, if anyone wants to see it there would be no problem to make an appointment. Expected dismantling date, second half of July 2025

GREINER U-3 ECO

• Manufacturer: GREINER

Total power required: 0.3 kW | Length: 420 mm | Width: 390 mm | Height: 700 mm