Used processing in Trenčín, Slovakia

2012 S.A.F. DBS-200RCS

• Manufacturer: S.A.F.

Machine dimensions:: 11.5 x 5.15 x 3.86 m The line consists of: - Blast chamber - Dust separator OP 9 - Blow gun - Exhaust fan - DONALDSON TORIT filter cartridges - Elevator - Two-stage abrasive cleaner - Conveyo...

2009 Kemper Filter-Master

• Manufacturer: Kemper
• Model: -MASTER

Supply voltage: 400 V | Airflow: 1200 m³/h | Machine weight: 80 kg

2007 KOMFI AMIGA

• Manufacturer: Komfi
• Model: AMIGA

Equipment: Replacement heating coil Lower pressure roller Rear traction roller Compressor BECKER

2001 MTA TAE 081/P1

• Manufacturer: MTA
• Model: TAE

Cooling performance: 30.1 kW | Integrated tank volume: 140 l | Machine dimensions: 1865 x 760 x 1447 mm | Machine weight: 451 kg

2002 Kaeser A36

• Manufacturer: Kaeser

Total hours: 10.000 h | Hours on: 8.500 h

1995 Battenfeld BA 250/50 Plus

• Manufacturer: Battenfeld

Control system: Unilog 1020 | Clamping force: 250 kN | Injection capacity: 49 cm³ | Injection weight: 44.6 g | Height of the plate for mounting the mold: 470 mm | Width of the plate for mounting the mold: 280 mm...

2022 AERZEN VML 25

• Manufacturer: Aerzen

Control system: AERtronic | Hours on: 20000 h | Efficiency: 24.17 m³/min | Nominal power: 90 kW | Machine weight: 2098 kg

1978 TOS CS 195 100-1

• Manufacturer: TOS

Weight of the injection molding machine: 2500 kg

2004 ELSKLO GKL-350

• Manufacturer: ELSKLO

Weight: 3000 kg | Machine dimensions: 1520 x 1430 x 1500 mm

2012 INTERMAC Master 23

• Manufacturer: Intermac
• Model: Master 23

Equipment: Software I-Cam X-axis travels: 2600 mm | Y-axis travels: 1300 mm | Z-axis travels: 275 mm | Power of the spindle: 7.5 kW | Workpiece size: 2500 x 1200 mm

2008 AlphaEko DN 3000

• Manufacturer: AlphaEko

The tank is in good condition.

2011 Schneider AirMaster AM 4-10 E1

• Manufacturer: Schneider

Efficiency: 435 l/min | Working pressure: 10 bar | Total power: 4 kW

1992 Demag D 100-452 NC

• Manufacturer: Demag

Clamping force: 100 t | Screw diameter: 45 mm | Injection capacity: 253 cm³ | Injection weight: 230 g

Rubber compound extrusion machine 63 mm

Screw diameter: 63 mm

2019 Inaircom PSC-M7-10-270

• Manufacturer: Inaircom

Hours on: 39686 h | Efficiency: 1050 l/min | Working pressure: 10 bar | Total power: 7.5 kW | Air tank capacity: 270 l | Machine weight: 300 kg