Used processing in Spain

Cutters

GORRI 622-24 Cardboard Chuck Cutter - 2022

- Voltage 400V - Total installed power 2.25 kW. - 0.75 kW cut-off wheel motor. - Support table with 2 rollers 6000 mm long and 80 mm in diameter. - Maximum spacing between support rollers approx. 280 mm, with sev...

Cardboard Chuck Cutter

- Voltage 400V - 0.73 kW cut-off wheel motor. - Support table with 2 rollers 4300 mm long and 100 mm in diameter. - Maximum spacing between support rollers approx. 280 mm, with several intermediate positions. - C...

TALLERES VILARRUBIAS 38/97 Winder - 1997

- Design speed 1000 m/min. - Maximum working speed 850 m/min - Usable width of board 2600 mm; overall width 2700 mm; Minimum width approx. 450mm. - Maximum diameter of finished coil 1800 mm. - Includes 6 pneumati...

RAUMASTER OY KICKER Pneumatic Coil Pusher - 2001

- 2 articulated curved arms and lower roller. - Driven by two side pneumatic cylinders. - Designed to push cardboard or paper rolls. - Operating conditions of this machine: unchecked. - Red safety guards are not ...

Automated truck loading silos

Untested functionality

STAINLESS STEEL BLADE MILL

Stainless steel mill on structure with 4 wheels. Without documentation

“QUADRO COMIL” MODEL “U-30” STAINLESS STEEL SIEVE MACHINE WITH EX FLAME PROOF MOTOR

• Manufacturer: Comil
• Model: U-30

“QUADRO COMIL” MODEL “U-30” STAINLESS STEEL SIEVE MACHINE WITH EX FLAME PROOF MOTOR, STRUCTURE WITH WHEELS AND ONE SIEVE AS IN STOCK MACHINE IN VERY GOOD CONDITION WE HAVE THE DOCUMENTATION OF THIS MACHINE REV...

STAINLESS STEEL ATEX QUICK SIEVE SHAKER

Stainless steel ATEX quick centrifugal sieve shaker. On 4 wheels. Upper cone diameter 525 mm Lower cone diameter 130 mm Lower outlet diameter 150 mm No documentation

2010 CENTRIFUGAL SIEVING MACHINE IN STAINLESS STEEL 400-1800 Kg/h

Stainless steel sieve shaker with a capacity of 400-1800 kg/h Power 7.5 kw Year 2010

SKID STAINLESS STEEL PIN MILL 316 + SLEEVE FILTER + HOPPER

• Manufacturer: Fabricante desconhecido

Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter and a hopper.

1999 BACHILLER STAINLESS STEEL BACHILLER MIXER MILL

• Manufacturer: Bachiller

Fan beater mill operates with a mobile disc with wear-resistant hard steel plates. Usable on two edges, against a static track. It is considered cold milling due to the high air flow it generates. Equipped with ...

2004 BACHILLER MDCB 300

• Manufacturer: Bachiller

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of ...

ROTAVAC ROTARY VACUUM FILTER STAINLESS STEEL 1219MM X 1524MM 5.8 M2

• Manufacturer: Fabricante desconhecido

Used Rotavac stainless steel rotary vacuum filter. Approximately 1219mm wide X 1524mm diameter stainless steel drum with 5.8 square meter filtration area. Driven by 1.5 kW, 400 volts, 3/50, 1440-60 rpm gear motor...

2014 IRON CROWN MILL 18.5 kW

• Manufacturer: Fabricante desconhecido

Crown mill made of iron equipped with control panel and converter The auger has a frequency converter With documentation