Used processing in Lucerne, Switzerland

Trak-Met TTP-600 I Mobile Sawmill I 2023

• Manufacturer: TRAK

We hereby offer this used Trak-Met TTP-600 mobile sawmill from 2023, located in Switzerland. Embodying mobility and power, this state-of-the-art mobile sawmill boasts a generous cutting length of 7800 mm. Equippe...

Grinding wheel moulds

The detail can be found in the attached appraisal Location : Prata Camportaccio (SO) To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to...

Sysmex XT-1800i

• Manufacturer: Sysmex
• Model: XT-1800I

Sysmex Hematology Analyzer XT-1800i. Fully automatic 5-part differential blood count analyzer. Compressor unit. Without PC or software. 230V, 50/60Hz, 250W. The following illustrations and descriptions refer to t...

2016 MAZAK VTC800/30SLR Ref No: 53585

• Manufacturer: Mazak
• Model: VTC 800

further options • Air blowing out of the workpiece • High pressure 15 bar through spindle • Mazak Monitoring B (Renishaw RMP60) • Tool length measurement x2 Table centre partition • NC rotary table, 360,000 posit...

2017 ITG 2-SPUR Ref No: 44272

• Manufacturer: ITG

System consists of: + ITG ITPA 100k150 vertical induction hardening system, YoM 2017 150 kW, 100 kHz + BACHMANN automation cell, YoM 2017 + 2x ABB IRB 4600 handling robots, YoM 2017 load capacity 60 kg, additiona...

2003 DMG DMU 50 M Ref No: 53751

• Manufacturer: DMG Mori
• Model: DMU 50

26,000 operating hours, 3,812 working hours Object: 53751 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Ta...

2003 DMG DMU 50 Ref No: 53750

• Manufacturer: DMG Mori
• Model: DMU 50

4726 spindle hours, 10,000 operating hours Object: 53750 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Tab...

1991 DANOBAT RTM 1600 - CNC Ref No: 54094

• Manufacturer: Danobat
• Grinding length: 1,600 millimeter

borehole: diameter: 203.2 mm Object: 54094 | Controls: SIEMENS 840 D | Grinding length: 1600 mm | Grinding width: 900 mm | Workpiece height (max) with largest wheel: 600 mm | Number of processing axes (exc...

1991 FEHLMANN PICOMAX 51 CNC Ref No: 55013

• Manufacturer: Fehlmann
• Model: Picomax 51

Machine in excellent condition. Tool holder equipment (1/2 shown in the picture) includes rotary table

2022 CHIRON DZ 08 W P+ Ref No: 51182

• Manufacturer: Chiron

Operating hours: Spindle 1: 4050 h, Spindle 2: 11,114 h Internal cooling 70 bar Fanuc Automation Robot M-10IA Integrated workpiece changing device Knoll coolant tank Knol KF 400/900

2005 CHIRON MILL 2000 HIGH SPEED Ref No: 50115

• Manufacturer: Chiron
• Model: MILL 2000

including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders ...

Gannomat Protec I CNC Machining Center

• Manufacturer: Gannomat
• Model: PROTEC

We hereby offer this used Gannomat Protec CNC machining center from 2019, located in Switzerland. It features an expansive working area of 1000 x 5600 x 60 mm, providing ample space for large workpieces. The mach...

2023 CHIRON DZ 08 P+ Ref No: 51477

• Manufacturer: Chiron

-Siemens tool management with retooling -Fanuc Automation Robot M-10IA -Operating hours: 7,200 h - of which spindle 1 original, spindle 2: 3896 h