Building Filters
- Trusted Seller
1978 FEINTOOL GKP F 250
- Manufacturer: FEINTOOL
Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...
Niederhelfenschwil, Switzerland - Trusted Seller
1972 FEINTOOL GKP F 100/160
- Manufacturer: FEINTOOL
Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...
Niederhelfenschwil, Switzerland - Trusted Seller
PLATARG 611
- Manufacturer: PLATARG
Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm Maximum speed: 80 spm Example of an overhaule...
Niederhelfenschwil, Switzerland - Trusted Seller
1978 PLATARG 312
- Manufacturer: PLATARG
Standard flat plate lifters Pneumatic feeder Machine still in production - video available
Niederhelfenschwil, Switzerland - Trusted Seller
2023 FEINTOOL FB ONE 11000
- Manufacturer: FEINTOOL
Absolutely mint condition: just 3'300 running hours, 700'000 strokes Special equipment fineblanking press: + block hydraulics for 4th and 5th force. High pressure 30-270 bar. + mechanical reamers (without tool-bo...
Niederhelfenschwil, Switzerland - Trusted Seller
2025 PLATARG 312 HS
- Manufacturer: PLATARG
Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...
Niederhelfenschwil, Switzerland - Trusted Seller
1968 PLATARG 912
- Manufacturer: PLATARG
Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top ...
Niederhelfenschwil, Switzerland - Trusted Seller
1999 SCHMID HSR500
- Manufacturer: Schmid
Press is equipped with 4. force Straightener SCHMID Loop control GSW SCHWALBE new in 2016
Niederhelfenschwil, Switzerland - Trusted Seller
1971 PLATARG 611
- Manufacturer: PLATARG
Platarg transfer press 611 Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm
Niederhelfenschwil, Switzerland - Trusted Seller
1987 PLATARG 912
- Manufacturer: PLATARG
The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...
Niederhelfenschwil, Switzerland - Trusted Seller
1968 FEINTOOL GKP 50/80
- Manufacturer: FEINTOOL
Object: 32057 | Total force (nominal): 80 to | Stroke: 50 mm | Stroke rate (min.): 28 /min | Stroke rate (max.): 72 /min | Nominal force: 12 to | Lower table (left-right): 420 mm | Lower table (front-back)...
Niederhelfenschwil, Switzerland - Trusted Seller
1971 FEINTOOL GKP 50/80
- Manufacturer: FEINTOOL
Press can be inspect under power. Feeder with hydr. motor.
Niederhelfenschwil, Switzerland - Trusted Seller
1997 BMV T1/250/22-11/150-300/380
- Manufacturer: BMV
Object: 48337 | Drive system: eccentric / crank | Number of suspensions: 2 | Number of slide actions: 1 | Slide ejectors / cushion: yes | Table cushion: yes | Feedstock transport direction: left to right | Total...
Niederhelfenschwil, Switzerland - Trusted Seller
1994 KAISER KSTU ZA 2000-15P
- Manufacturer: Kaiser
+ Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...
Niederhelfenschwil, Switzerland - Trusted Seller
1996 PLATARG 2513
- Manufacturer: PLATARG
Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...
Niederhelfenschwil, Switzerland