Used processing in Schwyz, Switzerland

2007 HURCO VTX U Ref No: 49805

• Manufacturer: Hurco
• Model: VTXU

Accessories: -chip conveyor -2 pallets various spare parts Immediately available

2013 MAZAK V-815/80 Ref No: 50182

• Manufacturer: Mazak

Object: 50182 | Controls: MAZATROL 640M | Number of processing axes (excl parallel axes): 3 | X-axis travel: 2000 mm | Y-axis travel: 810 mm | Z-axis travel: 760 mm | Spindle revolutions (max): 6000 /min | N...

2017 SORALUCE FLP 6000 Ref No: 50854

• Manufacturer: Soraluce

tool magazine with 60 slots Coolant system via shower ring and IKZ up to 70 bar Coolant type Coolant lubricant / air / air with MMS Electronic handwheel with cable transmission Accessories: Chip conveyor Cooling...

2009 TITAN Ref No: 53558

• Manufacturer: Titan

Equipment: - 5-axis woodworking center equipped with a 2-axis head - Vacuum pump (Busch R5) - Chip extraction system X/Y axis rack and pinion drive Z axis glass scale Additional spare parts available - Used milli...

2012 CHIRON FZ 12K W HIGHSPEED Ref No: 53173

• Manufacturer: Chiron
• Model: FZ12

- Shuttle table machine - Knoll (KSS) watertank FKA/350 (2011) - Highspeed plus package - - Renishaw probe, with a Chiron Lasercontrol System F1000 and with a workpiece support control - Peisseler AWU 160P rotary...

2001 MORI SEIKI SV 503 Ref No: 54136

• Manufacturer: Mori Seiki
• Model: SV-503

Object: 54136 | Controls: MORI SEIKI MSX 501 III | Number of processing axes (excl parallel axes): 3 | X-axis travel: 800 mm | Y-axis travel: 510 mm | Z-axis travel: 460 mm | Table surface (left-right): 1320 ...

2012 MAZAK V655/80N Ref No: 50228

• Manufacturer: Mazak

Object: 50228 | Controls: MAZAK MAZATROL 640 M | Number of processing axes (excl parallel axes): 3 | X-axis travel: 2000 mm | Y-axis travel: 650 mm | Z-axis travel: 650 mm | Spindle revolutions (max): 6000 /...

2001 TBT BW 200 Ref No: 46842

• Manufacturer: TBT
• Model: BW 200

20 toolstations with rotating table 800x600 approx 46300h Including chip conveyor and various tool holders

2003 MORI SEIKI NV 5000 Ref No: 54611

• Manufacturer: Mori Seiki
• Model: NV-5000

Object: 54611 | Controls: MORI SEIKI MSC 501 | Number of processing axes (excl parallel axes): 3 | .. among of them simultaneous cnc axes: 3 | X-axis travel: 800 mm | Y-axis travel: 510 mm | Z-axis travel: 510...

2007 HAAS VF-11B/40HE Ref No: 54262

• Manufacturer: Haas
• Model: VF-11B

Under power A lot of tools Delivery to enduser 2008

1999 FEHLMANN PICOMAX 60 CNC Ref No: 48353

• Manufacturer: Fehlmann
• Model: PICOMAX 60 CNC

Machine in TOP condition - Power ON : about 37000 h - Spindle hours: about 3640 h Equipment: - various tool holders - 1 x Mecatool clamping system - machine on power to inspection

micro imma

Manual Cleaning Centrifugal Clarifier mod. "Imma MICRO" , suitable for processing turbid wine with suspended solids for a production of about 1500/2000 liters per hour. Machine consists of stainless steel impelle...

IMMA MICRO

Manual Cleaning Centrifugal Clarifier model "Imma MICRO" , suitable for processing turbid wine with suspended solids for a production of about 1500/2000 liters per hour. Machine consists of stainless steel impell...

2006 IEMCA L 20 VIII

• Manufacturer: Iemca

Number of spindles: 2 | Max. turning diameter: 20 mm | Maximum turning length: 200 mm | From: 200 t/min | Up to: 6000 t/min | Numbers: 3 | Number of tools: 12 | Turning tools: 5 pce | Drilling tools: 3 pce | Tra...

2006 IEMCA L 20

• Manufacturer: Iemca

Number of spindles: 2 | Max. turning diameter: 20 mm | Maximum turning length: 200 mm | From: 200 t/min | Up to: 6000 t/min | Numbers: 3 | Number of tools: 12 | Turning tools: 5 pce | Drilling tools: 3 pce | Tra...