Used processing in Schwyz, Switzerland

1968 PLATARG 912

• Manufacturer: PLATARG

Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top ...

1999 SCHMID HSR500

• Manufacturer: Schmid

Press is equipped with 4. force Straightener SCHMID Loop control GSW SCHWALBE new in 2016

1971 PLATARG 611

• Manufacturer: PLATARG

Platarg transfer press 611 Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm

1987 PLATARG 912

• Manufacturer: PLATARG

The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...

1968 FEINTOOL GKP 50/80

• Manufacturer: FEINTOOL

Object: 32057 | Total force (nominal): 80 to | Stroke: 50 mm | Stroke rate (min.): 28 /min | Stroke rate (max.): 72 /min | Nominal force: 12 to | Lower table (left-right): 420 mm | Lower table (front-back)...

1997 BMV T1/250/22-11/150-300/380

• Manufacturer: BMV

Object: 48337 | Drive system: eccentric / crank | Number of suspensions: 2 | Number of slide actions: 1 | Slide ejectors / cushion: yes | Table cushion: yes | Feedstock transport direction: left to right | Total...

1994 KAISER KSTU ZA 2000-15P

• Manufacturer: Kaiser

+ Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...

1996 PLATARG 2513

• Manufacturer: PLATARG

Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...

1977 PLATARG 611

• Manufacturer: PLATARG

A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...

1969 PLATARG 312

• Manufacturer: PLATARG

This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...

2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3

• Manufacturer: Benelli

Press equipped with 2 feeing lines - one from the side for blank cutting in transfer mode and one in line for for progressive die operation.

2007 SCHMID HSR400

• Manufacturer: Schmid
• Model: HSR400

including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers

FEINTOOL GKP 250

• Manufacturer: FEINTOOL

Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...

2001 Caps bunker Feeders caps

Item Description/Artikelbeschreibung: English: Deutsch: Further Information/Weitere Informationen The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in an...

1995 KAISER V63/620

• Manufacturer: Kaiser

Operating hours: 74601 (measured on 14-05-25, machine is still in use) Maintenance records available upon request