Used processing in Bern, Switzerland

1968 FEINTOOL GKP 50/80 Ref No: 32057

• Manufacturer: FEINTOOL

Object: 32057 | Total force (nominal): 80 to | Stroke: 50 mm | Stroke rate (min.): 28 /min | Stroke rate (max.): 72 /min | Nominal force: 12 to | Lower table (left-right): 420 mm | Lower table (front-back)...

1971 FEINTOOL GKP 50/80 Ref No: 37325

• Manufacturer: FEINTOOL

Press can be inspect under power. Feeder with hydr. motor.

1994 KAISER KSTU ZA 2000-15P Ref No: 43706

• Manufacturer: Kaiser

+ Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...

1977 PLATARG 611 Ref No: 43685

• Manufacturer: PLATARG

A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...

1969 PLATARG 312 Ref No: 40583

• Manufacturer: PLATARG

This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...

2007 SCHMID HSR400 Ref No: 51084

• Manufacturer: Schmid
• Model: HSR400

including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers

FEINTOOL GKP 250 Ref No: 38885

• Manufacturer: FEINTOOL

Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...

2001 MIOS T20 FV Ref No: 55890

• Manufacturer: Mios

Object: 55890 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Quick die change system: no | Total force (nominal): 20 to | Spigot hole diameter: ...

2000 IMS 50 RE Ref No: 55279

• Manufacturer: IMS

Object: 55279 | Drive system: eccentric / crank | Total force (nominal): 50 to | Table surface (left-right): 440 mm | Table surface (front-back): 360 mm | Spigot hole diameter: 40 mm | Stroke: 90 mm | Strok...

2002 ESNA VFS/PN45 Ref No: 55264

• Manufacturer: ESNA

Object: 55264 | Drive system: eccentric / crank | Total force (nominal): 45 to | Table surface (left-right): 410 mm | Table surface (front-back): 280 mm | Opening in bed (diameter): 40 mm | Stroke rate (max....

1997 ROSS 63R4 Ref No: 55175

• Manufacturer: Ross

Object: 55175 | Controls: DANFOS | Drive system: eccentric / crank | Frame design: C-frame, single sided, inclinable | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Opening in tabl...

2002 MIOS T20 FV Ref No: 53991

• Manufacturer: Mios

Object: 53991 | Spigot hole diameter: 30 mm | Stroke rate (max.): 155 /min | Stroke min.: 5 mm | Stroke max.: 60 mm | Shut height (stroke down, adjustment up), bdc: 280 mm | Throat (c-frame): 180 mm | Tota...

2000 PRESSIX 100 CNR 4 Ref No: 51223

• Manufacturer: Pressix

Located in Barcelona - Spain 2 identical units available

MACCHI FILM DIE diam.180 mm.

• Manufacturer: Macchi

For blown film die head 180 mm. inner diam. 340 mm. outer diam. Tongue and groove Height 145 mm.

HOT MACRO-PERFORATOR 3 to 16 mm holes

For BOPP PP PVC thermoplastics in general. Can be fit on cutting machines, rewinders, Flexoprinting machines or other plastic film treatment machines. Max perforation width 1.500 mm. Roll width 1.700 mm. (availab...