Building Filters
Platarg #9-12 ICOP Transfer Press
Platarg #9-12 ICOP Transfer Press (12) Stations, 3.54" Max. Blank Diameter, 3" Max. Depth of Draw, 9-Ton Per Station, Transfer Mechanism, S/N 912F116 [Asset# P222]
Canton, MI
Platarg 312 ICOP Eyelet Transfer Press -New 1982- 12 Operations
- Manufacturer: PLATARG
- Stroke length: 50.8 mm
Condition: Used, Overall In Great Shape, Complete and in operation- Come check it out! 12 Operation Eyelet Press - Full set of bottom cams - Cup Hold Down Assembly -Includes a good transfer slide = not shown, if ...
Watertown, CT
Platarg 3 Size Bottom Shaft Kick Up Cams 36 Available
- Manufacturer: Cames
Platarg 3 Size bottom shaft kick up cams -1.437" ID Hole -1" Lift -1.030" Wide New 36 Available Price is each
Watertown, CT
Platarg 3 Size Top Shaft Lift + Plunger Cams
- Manufacturer: PLATARG
Platarg 3 Size Top Shaft Cams -2.000" Inside Bore -1.875" Cam Stroke -1.000" Wide New 17 - Plunger Pushers Available New 21 Lifter Cams - .750" Wide Available Please Reach out to inquire
Watertown, CTPlatarg Model 612-F 4.5" Stroke ICOP Transfer Press W/Auxiliary 13th Station
- Manufacturer: PLATARG
- Stroke length: 114.3 mm
Machine In Great Overall Condition Runs Well Transprobe Mk6 16 Operation Die Protection 2 Row Oscilating Roll Feed- Platarg Side Cam Drive Type Drops A Electric Oil Lube Pump & Tank Chopper W/Cam Under Motion Act...
Watertown, CT
PLATARG, 912, 13 stations, 6.5" long stroke
PLATARG TRANSFER PRESS Standard Flat Plate Lifter Cams 13 Stations, 12 Rams + 1 Slave Standard CAMS - WWF type stage 6&8 6.50" (165 mm) long Stroke - checked and confirmed 3.11" (79mm) depth of draw Screw type ra...
Thomaston, CT
PLATARG, 912, 13 stations, 6.5" long stroke
PLATARG TRANSFER PRESS Standard Flat Plate Lifter Cams 13 Stations, 12 Rams + 1 Slave 6.50" (165 mm) long Stroke - checked and confirmed Screw type ram adjustment stages 1-5 Wedge Adjustment stages 6- 12 Stroke ...
Thomaston, CTPlatarg 912 ICOP Transfer Press 6.5" Stroke Complete Press Nice
- Manufacturer: PLATARG
- Stroke length: 165.1 mm
Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top ...
Watertown, CT
PLATARG, 612-F-132, 12 Rams 1 slave, 4.25 stroke
- Manufacturer: Rams
Thomaston, CT
Platarg 811 eyelet transfer press, 12 station deep draw press #3256
- Manufacturer: PLATARG
Asset Description Notes: Platarg 811 Eyelet Transfer press Number of Stations 12 (11+1) Capacity per Ram 8 tons Standard Stroke 4.5" (114mm) Max Shell Height 2.13" (54mm) Standard Ram Pitch 3.25" (82mm) Blank Dia...
- Trusted Seller
PLATARG 3009 Ref No: 55972
- Manufacturer: PLATARG
The machine is in good condition and in running condition. As it can be see from the pictures, the machine comes complete with slide, cams, Nitrogen cylinders and pistons that can be adjusted from 200 PSI to 2,00...
Niederhelfenschwil, Switzerland - Trusted Seller
1985 PLATARG 712 Ref No: 43759
- Manufacturer: PLATARG
Technical details of the machine below: - Stations 12 - Station distance 82.55 mm - max. strip width 90 mm - max. strip thickness 1.63 mm - max. blank diameter 52 mm (standard) 44 mm (zig-zag) - min. blank diamet...
Niederhelfenschwil, Switzerland - Trusted Seller
1988 PLATARG 912 Ref No: 50350
- Manufacturer: PLATARG
1 station from 336º to 242º stroke 77 mm 2 station from 278º to 110º stroke 111 mm 3 station from 284º to 110º stroke 124 mm 4-12 station from 284º to 110º stroke 154 mm Shell height max 154/2 = 77 mm Ejector str...
Niederhelfenschwil, Switzerland - Trusted Seller
1987 PLATARG 912 Ref No: 46450
- Manufacturer: PLATARG
The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...
Niederhelfenschwil, Switzerland - Trusted Seller
1986 PLATARG 612 Ref No: 43820
- Manufacturer: PLATARG
12 Rams and (1 Slave- TBD) Full follow cams Wedge adjustable type rams Stroke of Cams: 4.25" or 107mm Depth of draw (Shell Height): 2" or 50mm Transfer slide - none Platarg type Zig-Zag Feeder - material input fr...
Niederhelfenschwil, Switzerland
