Used pasteurizer

3" X 138" Pasteurizer Tunnel

Name: Pasteurizer Tunnel | Arrival date: 07-07-2025 | Dimensions l x w x h (inches): 207 x 53 x 52 | Capacity: 3" X 138" | Weight (lb.): 970 | Available quantity: 1

Pasteurizer 250 GAL

250 Gallon, 304 stainless steel, mixing tank and heat exchange system. Vessel dimensions: 42" diameter with a 42" straight wall, dome top and slant bottom with (1) 3½" OD / 3" ID tri-clamp discharge with 18" grou...

2015 KHS Pasteurizer

• Manufacturer: KHS

Setup for Juice, 50 Gallons/Minute, Incoming Product Temperature 65ºF minimum – incoming product temperature max is 85ºF, Target Hold Time 15 seconds, 460 Volts, 3PH, 60HZ, Water 40 PSIG, Air 80 PSIG, Steam PSIG,...

GC Evans Pasteurizer

• Manufacturer: Evans

There are three basic models of the GC Evans Pasteurizer. All GC Evans Sales Pasteurizers are designed to require the minimum of mechanical maintenance. All key components are accessible and easily replaced. GC E...

2016 Corosys Flash Pasteurizer

• Manufacturer: Corosys

Installed January 2016, Last Supported a 6 Head Automatic Keg Filling Line for Brewery, Very Good Condition, 460 Volts, 3 Phase, 60HHZ, Siemens PLC with Dan Foss VFD Drives, Fully Operational, Operating Manuals I...

APV Pasteurizer SR2-R-14

• Manufacturer: APV

Pasteurizing system with a 30 Gallon, stainless steel, tank and heat exchange system. Vessel dimensions: 25½" diameter with a 17" straight wall, dome top and slant bottom. Equipped with a 7½ HP Ampco centrifugal ...

Pro Engineering / Manufactorin Pasteurizer Tunnel 15030FA

• Manufacturer: Pro Engineering / Manufactorin

Pro Engineering, Model Slim / Line 15030-FA is (2) tier, stainless steel, belt POUCH tunnel pasteurizer with (3) zones for pasteurizing, warming and cooling with amount of product per hour – depending on material...

Pavan USA Inc Pasteurizer Tunnel TORESANI PASTA

• Manufacturer: Pavan USA Inc

Pavan / Toresani Model PV-PE150/18 and Model 150/3/8, hot / cold water with air, pasteurizing and pre-drying tunnel system, with number of thru product per hour – depending on materials and application. All stain...

2021 APV / SPX Pasteurization System

• Manufacturer: APV / SPX

Equipment Overview This is a complete 2021 stainless steel pasteurizing and clean-in-place (CIP) system built for food-grade liquid processing. It includes an APV plate heat exchanger, Waukesha sanitary pump, jac...

2015 Napasol Steam Pasteurization System

• Manufacturer: Napasol

PROCESS FLOW STAGES: AUTOMATION & CONTROLS: HMI-CONTROLLED PLC IN RITTAL ENCLOSURE MULTI-LEVEL USER LOGINS MANUAL/AUTO OPERATION MODES AUTOMATED PROCESS MONITORING AUXILIARY EQUIPMENT: WAMGROUP FPHTU54VS199600 FI...

Laitram Machinery Nut Pasteurizer

• Manufacturer: Laitram Machinery

Laitram Machinery Nut Pasteurizer - Built new in 2017 - NEVER INSTALLED - Rated for 8,000 lbs/hr - Based on 2 minute pasteurizing time for 2" product bed - Model PHB-2 Pre-Heater - Model OSTA-2 Pasteurizer - Mode...

Krones SD10-IG16 heat exchanger, pasteurizer

• Manufacturer: Krones

Krones SD10-IG16 heat exchanger. in good condition All parts ordered before 3:30 pm (EST) typically ship same day via UPS, FedEx, or USPS! If the order is placed after 3:30 pm and you still would like it send ou...

3 USED UHT/HTST PASTEURIZERS WE HAVE FOR SALE

MICROTHERMICS UHT/HTST LAB 25 DIPW DIRECT STEAM PASTEURIZATION SYSTEM REBUILT HTST TUBULAR PASTEURIZER - 2016 GOODNATURE FPXT-264 HTST FLASH PASTEURIZER

Pasteurizer, HTST, Tube-in-tube, S/st, 1,000 PPH, Kreuzmayr #A744852

• Manufacturer: Kreuzmayr

Kreuzmayr KZE-A 1000 Short Time Heating Pasteurizer, tube-in-tube system, rated for 1,000 lbs/hr. Includes Plate heat exchanger for preheating and re-cooling of the product and for heating to the pasteurization t...