Used parallel in Northern Europe

Trusted Seller
2016 MAZAK VTC800/30SLR Ref No: 53585
- Manufacturer: Mazak
- Model: VTC 800
further options • Air blowing out of the workpiece • High pressure 15 bar through spindle • Mazak Monitoring B (Renishaw RMP60) • Tool length measurement x2 Table centre partition • NC rotary table, 360,000 posit...
Niederhelfenschwil, Switzerland
Auction
SCM NOVA SI 400EP Sliding Saw
- Manufacturer: SCM / SCMI
- Model: SI400EP
Machine: Sliding table saw | Carriage: 3200 mm | 90° cutting height: 140 mm (blade Ø400 mm) | 45° cutting height: 97 mm (blade Ø400 mm) | Blade inclination: 0 - 45° (manual) | Main blade speeds: 3000 / 4000 / 50...
Provence-Alpes-Côte d'Azur, France
Visit Auction Website
Trusted Seller
SIEMENS electric motor
- Manufacturer: Siemens
Three-phase electric motor SIEMENS 1LG4 186-6AA60-Z (1LG4186-6AA60-Z) 15 kW 965 rpm 400/690 V 3AC 50 Hz 60 Hz operation possible! IP 55 Used, tested!
$1,322 USD
Zschepplin, Germany
Trusted Seller
SIEMENS geared motor with brake
- Manufacturer: Siemens
Hypetrtherm Powermax 1650 Shaft diameter: Ø 24 mm | Wavelength: 50 mm | Groove width: 8 mm | Gear foot: 170 x 150 mm | Hole spacing ( parallel to the shaft ): 120 mm | Hole spacing ( transverse to the shaft ): 13...
$325 USD
Zschepplin, Germany
Trusted Seller
SEW gearmotor with brake
Gear motor with brake SEW, VECTOR ANTRIEBSTECHNIK ROTTERDAM SSG4W D112M-4-BS-HL ( SSG4WD112M-4-BS-HL ) 4.0 kW 84 rpm 220 / 380 V 3AC IP44 New !
$1,136 USD
Zschepplin, Germany
LACFER CR – 1 – 250
It is a second-hand conventional parallel lathe in very good condition. If you want more information, contact us.
Álava, Spain
Trusted Seller
ENERGO three-phase electric motor
Three-phase electric motor ENERGO АИР80A8У3 0.37 kW 700 rpm 220 / 380 V 3AC IP 54 New !
$185 USD
Zschepplin, Germany
Trusted Seller
SPECK coolant pump
- Manufacturer: Speck
Coolant pump, peripheral pump, water pump, special pump SPECK - PUMPS CSY-4081 CSY-4081.M22 2800 rpm 230 / 400 V 3AC 50 Hz Material ( pump housing ): brass used, tested !
$371 USD
Zschepplin, Germany
Trusted Seller
保护程度/绝缘等级
Centrifugal pump HILGE Euro-HYGIA - II Bloc 2900 rpm 400 / 690 V 3AC 50 / 60 Hz IP55 Material ( pump ): Stainless steel Internal connection diameter ( inlet / outlet ): 67 / 60 mm Overhauled ! tested !
$2,782 USD
Zschepplin, Germany
Trusted Seller
Sartorius Biostat B Twin Bioreactor Controller 2x Motor 2x Balance 2x Heating Mantle
- Manufacturer: Sartorius / Essen / Intellicyt
- Model: Biostat B
Manufacturer: Sartorius Model: Biostat B Twin Bioreactor Controller - 2x motor, 2x balance, 2x heating jacket Description The Sartorius Biostat B Twin is a powerful bioreactor controller for the simultaneous cont...
$22,763 USD
Get financing
Est. $428/mo
Schönwalde-Glien, Germany
2007 P.E. ROLLMATIC N
- Manufacturer: P.E.
Used PET Labeller P.E. 2007 Roll-Fed – 30,000 BPH Boost your production efficiency with this Used PET Labeller P.E. 2007 Roll-Fed , capable of handling 30,000 bottles per hour (BPH). This reliable used beverage m...
Europe
Trusted Seller
ATB electric motor
pouvoir Mounting position: B3 | Shaft diameter: Ø 42 mm | Wavelength: 110 mm | Detalles de embalaje: 12 mm | Motor base: 260 x 325 mm | Hole spacing ( parallel to the shaft ): 210 mm | Hole spacing ( transverse t...
$638 USD
Zschepplin, Germany
Trusted Seller
BAUMÜLLER DC motor
- Manufacturer: Baumuller
DC motor and tachogenerator BAUMÜLLER GNA 132 MVA ( GNA132MVA ) 12.9 / 20 / 20 kW 1000 / 1550 / 4500 rpm 260 / 400 / 400 V DC Tachogenerator: GHTS 42 20 V at 1000 rpm Belt pulley: Ø 205 mm, groove width: 14 mm, 3...
$2,550 USD
Zschepplin, Germany
Trusted Seller
Zeiss Axioplan Trinocular Microscope Microscope Body 2x PL10x/25 HAL100
- Manufacturer: Zeiss
- Model: Axioplan
Manufacturer: Zeiss Model: Axioplan Trinocular Microscope Body with 2x PL10x/25 and HAL100 illumination Description The Zeiss Axioplan Trinocular Microscope is a high-quality microscope body designed for versatil...
$11,036 USD
Get financing
Est. $217/mo
Schönwalde-Glien, Germany
Trusted Seller
Karl Mahr 840 FS/So, 9105769, 150-200 mm, dial indicator snap gauge, parameter S
- Manufacturer: Mahr
Technical Specifications: - Rigid frame. Handle open on one side to prevent hand heat transfer; with heat-insulating grips. - Both measuring probes are made of long, stainless, hardened steel. - Measuring surface...
$2,484 USD
Borken, Germany