Building Filters
- Trusted Seller
MORBIDELLI UNIVERSAL 4322 C CNC Machine Center with NESTING Table
- Manufacturer: Morbidelli
X axis working area: 14 ft 1.29 inch | Y axis working area: 7 ft 2.61 inch | Working table: Nesting | Main electrospindle power: 12 KW | Number of controlled axes: 3 axes | Total number of drilling spindles: 12 ...
Pollentia, Italy - Trusted Seller
Putsch Meniconi Kopernic
- Manufacturer: Putsch Meniconi
- Working range in X - Y - Z mm. 4,200 - 1,600 - 100 (available on request up to 6,000 x 2,200mm.) - Continuous working plane - Side and bottom reference stops - Gantry machine with Gandry system - Double motoriz...
Silvi, Italy - Trusted Seller
PLOT ELECTRONICS SENTINEL N 2160 CNC router
- Manufacturer: PLOT ELECTRONICS
was built in 2021 in Poland by PLOT Electronics. This extremely efficient machine is the perfect choice for precision machining of a wide range of materials, i.e. aluminium, plastics and wood. The machining proce...
$75,040 USDJelenia Góra, Poland - Trusted Seller
2023 HAAS GR-510
- Manufacturer: Haas
- Model: GR-510
$205,000 Current Replacement Cost. X 121" Y 61" Z 11" Power 15 hp RPM 10,000 RPM # ATC 10 Taper 40 Table-W 53" Table-L 122"
Santa Ana, CA - Trusted Seller
Vitap Point K2 2.0 I CNC Machining Center I 2021
- Manufacturer: Vitap
- Model: K2 2.0
Explore this used Vitap Point K2 2.0 CNC machining center from 2021, located in Slovakia. This versatile machine boasts a workpiece width range of 180 - 1250 mm, catering to a variety of woodworking projects. Wit...
$63,886 USDSlovakia 
Used CNC machine: TopEdge from Paul Ott
- Manufacturer: OTT
18.5 inch Beckhoff controller 2x joiners CombiMelt gluing system AKM = automatic edge magazine Roller magazine 4-fold Snipping unit K12 Flush trimmer Fine router AKF = automatic end trimming unit Scraper - ZK2 Su...
Lage, Germany- Trusted Seller
2014 Hundegger Speedcut SC3-200
- Manufacturer: Hundegger
A used HUNDEGGER Speedcut SC3-200 Year of construction 2014 - Cutting machine SC3 (mirror machine) Machine works from right to left - Angle and tilt drive for sawing station - Automatic infeed system - Feeding cr...
Pähl, Germany - Trusted Seller
2012 Hundegger Speedcut SC 3
- Manufacturer: Hundegger
1 used HUNDEGGER Speedcut SC3-200 year of construction 2012 fully automatic cutting machine - 5-axis sawing station with angle and tilt drive - Automatic infeed system - 6-strand infeed cross conveyor for timber ...
Pähl, Germany - Trusted Seller
2017 Hundegger K2i 650
- Manufacturer: Hundegger
HUNDEGGER K2i 650 TOP 1 a well maintained Year of construction 2017 Machining cross-sections 300 x 650 mm Frame length 13.56 m Fully automatic timber infeed Infeed roller conveyor Feeding and loading cross convey...
Pähl, Germany - Trusted Seller
2017 Hundegger K2i 650
- Manufacturer: Hundegger
HUNDEGGER K2i 650 TOP 1 a well maintained Year of construction 2017 Machining cross-sections 300 x 650 mm Frame length 13.56 m Fully automatic timber infeed Infeed roller conveyor Feeding and loading cross convey...
Pähl, Germany 
Castle TSM-12 Benchtop Pocket Cutter Machine
- Manufacturer: Castle
- Model: TSM-12
The TSM-12 benchtop pocket cutter machine routs the 6 degree, low-angle Castle Pocket with no tear out in less than 2 seconds. The superior low screw angle minimizes joint shift while providing strong, stable joi...
Dundee, NY
Laguna, I|Flux: 10 Elite Dust Collector
- Manufacturer: Laguna
The machining of MDF, Melamine, Painted Panels, and other man made material creates a very fine and harmful dust to the surrounding operators. For the dust collector it is even worse; the filters get clogged and ...
Dundee, NY
CNC Machining Center _ GANNOMAT ProTec
- Manufacturer: Gannomat
- Model: PROTEC
Gannomat ProTec - CNC through-feed machine for drilling, grooving and routing Short introduction: • Small footprint requirement, less than 3,3 m2 • Large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpie...
Austria- Trusted Seller
2016 BACCI MASTERCUT BAND SAW [SB-011602]
- Manufacturer: Bacci
- Model: MASTERCUT
BACCI MASTER.CUT CNC Bandsaw with NC Router and ATC. The operating fields of the two units, (saw & router) are fully independent, allowing machining and cutting of the complete panel or multiple stacked panels. -...
$94,530 USDUnited States 
Castle TSM-30 Series Pocket Cutter Machines
- Manufacturer: Castle
Designed for continuous production in cabinet manufacturing, furniture plants, mobile home factories, and more, the TSM-30 Series Pocket Cutters are available in three different voltage options: 220V Single Phase...
Dundee, NY