Search By Category

Search By Manufacturer

Building Filters

502

Used metal processing in Aarau, Switzerland

  • Sheet metal benders

    Sheet metal benders

    • Manufacturer: Zako Skotnice

    Length: 3 – 8m | Strength: 1mm/2mm/3mm | Depth(width): 1m or 1.25m | Bend angle: 145° / 165° | Bending beam: Geometry according to customer requirements | Delivery time: about 4 months or depending on the a...

    Steißlingen, Germany
  • Trusted Seller
    2014 BALLIU MINOTAUR 4XL Ref

    2014 BALLIU MINOTAUR 4XL Ref No: 56418

    • Manufacturer: Balliu

    BALLIU MINOTAUR 4XL CO₂ laser cutting system Rofin DC 025 The system is equipped with a ROFIN-SINAR DC 025 CO₂ laser source (approx. 250 W) and was operated as a complete, functional production system. Ideally ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2010 PLASMATOME 20 MPC Ref

    2010 PLASMATOME 20 MPC Ref No: 51131

    • Manufacturer: PLASMATOME

    The plasma is in operation, if anyone wants to see it there would be no problem to make an appointment. Expected dismantling date, second half of July 2025

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2001 LASCO TZP 1000 SO

    2001 LASCO TZP 1000 SO Ref No: 46228

    • Manufacturer: Lasco

    Complete hot forming line (sheet metal applications) consisting of: * 1000 to. hydraulic press LASCO * Schwartz furnace system: - max. lining width: 1700 mm - Furnace length: 27060 mm * Strothmann feeder * ABB lo...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 LOIRE SAFE EDIMR 800

    2003 LOIRE SAFE EDIMR 800 Ref No: 46229

    • Manufacturer: Loire Safe

    Complete hot forming line (sheet metal application)consisting of: * Hydraulic press LOIRE SAFE 800 to. * Schwartz GA1534 furnace system: - max. lining width: 1.500 mm - Inner furnace length: 20.000 mm - Inner hei...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2015 HS AUTOMATION MS41OL Ref

    2015 HS AUTOMATION MS41OL Ref No: 45513

    • Manufacturer: HS AUTOMATION

    - Hydraulic spreading process - Reel drive three-phase motor - Tape loop control Pull-off via preset pressure or via loop control - Coil stop arms 6 pieces with quick clamping system - Protective device against t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 ARKU RM 50X/9 ECOPLAN

    2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

    • Manufacturer: Arku

    Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 ARKU RM 50X/9 ECOPLAN

    2005 ARKU RM 50X/9 ECOPLAN Ref No: 43890

    • Manufacturer: Arku

    Coil line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU RM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-to-length s...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1989 ARKU RM 5035.4/21 Ref

    1989 ARKU RM 5035.4/21 Ref No: 42744

    • Manufacturer: Arku

    Line consisting of + Uncoiler ARKU AH4000/MSG-4Q + insert attachment ARKU + precision leveller ARKU RM 5035 4/21 + band loop ARKU levelling capacity according to diagram

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2016 SCHMIDT EP 343 Ref

    2016 SCHMIDT EP 343 Ref No: 52947

    • Manufacturer: Schmidt

    Object: 52947 | Controls: SCHMIDT | Total force (nominal): 0.25 to | Table surface (left-right): 180 mm | Table surface (front-back): 150 mm | Slide force: 0.25 to | Stroke: 100 mm | Mains voltage: 400 V |...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1998 HYDRAP HPDK 100 Ref

    1998 HYDRAP HPDK 100 Ref No: 55217

    • Manufacturer: HYDRAP

    machine in top condition Object: 55217 | Drive system: hydraulic | Openings in uprights: yes | Table cushion: yes | Total force (nominal): 100 to | Table surface (left-right): 700 mm | Table surface (front-back...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1990 HYDRAP HKP 12 Ref

    1990 HYDRAP HKP 12 Ref No: 45747

    • Manufacturer: HYDRAP

    Hour counter: 30'181 h last safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1990 LAUFFER EPT 100 Ref

    1990 LAUFFER EPT 100 Ref No: 49540

    • Manufacturer: LAUFFER

    Equipment: - Cutting impact dampening - Hydraulic die cushion and ejector - CNC - gripper feed (200x900x1700) - Soprem belt system (optional) see article no. 3-49541

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 SCHULER GRÄBENER GMO 2-315-2000-160

    2003 SCHULER GRÄBENER GMO 2-315-2000-160 Ref No: 44872

    • Manufacturer: Schuler

    Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 LOIRE SAFE EDIM 350-150/16-14/14-12

    1999 LOIRE SAFE EDIM 350-150/16-14/14-12 Ref No: 41754

    • Manufacturer: Loire Safe

    Object: 41754 | Controls: SIEMENS S5 95U | Drive system: hydraulic | Openings in uprights: yes | Total force (nominal): 350 to | Table surface (left-right): 1600 mm | Table surface (front-back): 1400 mm | Str...

    Niederhelfenschwil, Switzerland
  • no-image_en.png

    Metallkraft MS3V Sheet Metal Processing

    • Manufacturer: Metallkraft
    • Model: MS3V

    Good condition Metallkraft MS3V Sheet Metal Processing. Located in Switzerland and other countries. Click request price for more information.

    Switzerland
12345