Used manual line

2009 Controlled Automation Beam Drill Line DRL-348TC

• Manufacturer: Controlled Automation
• Model: DRL-348TC

Includes Controlled Automation CNC Control with Updated Yaskawa Drives (2015) HEM Model WF140HM-DC Horizontal Straight Cut Band Saw (2001), S/N 774401 165'" Controlled Automation Cross Transfers with Control (200...

88" WIDE DUNCAN TECHNOLOGIES INSPECTION REWINDER

• Manufacturer: Duncan

904171.006 One (1) Used 88” Duncan Technologies inspection machine. Cleaned & tested Age 2001. Serial # DT10014-01. Idlers in machine are 91” wide, 4” diameter. Single position unwind & single position center rew...

6000 LB X 40" AMERICAN STEEL LINE MOTORIZED UNCOILER Z23033

• Manufacturer: American Steel Line
• Model: 60

40" MANDREL WIDTH 16" - 20" ID 60" OD MOTORIZED MANUAL EXPANSION VARIABLE SPEED 67" X 48" X 63" T APROX. 2000 LBS APROX.

10,000 LB x 42" AMERICAN STEEL LINE MOTORIZED UNCOILER 19045F

• Manufacturer: American Steel Line
• Model: 1000

MODEL #: 1000 SERIAL #: 486 42" MANDREL WIDTH 17" - 21" COIL ID 60" COIL OD MOTORIZED MANUAL EXPANSION LOOP ARM 102" LR x 48" FB x 86" TALL 4,500 LBS ESTIMATED WEIGHT GOOD CONDITION

Packaging & Fulfillment Line

• Manufacturer: Packaging & Fulfillment

Equipment Overview This is a fully integrated, multi-zone packaging automation system designed for mid- to high-throughput operations. It accepts raw or pre-sorted product, routes it through synchronized cartonin...

2500 L X 18" American Steel Line Non Motorized Uncoiler Z22060Q

• Manufacturer: American Steel Line

18' Mandrel Width 16" - 20" ID 60" OD Manual Expansion Manual Drag Brake 2 Keepers 48"LR X 53"FB X 60" Tall 1500 LBS Approx Weight

2007 Stürtz Machinery SMI-CNC-H-4K-20/20

• Manufacturer: Stürtz Machinery

MACHINE EQUIPPED WITH CNC Control Two spindle routing system to fabricate sashes for installation of injection molded tilt latches 2 meter Automatic Buffer Transport System to receive welded squares and transport...

2500 LB X 12" X .138" PA SERVO FEED LINE Z24006F

2500 LB X 14" PA DOUBLE END UNCOILER 14" MANDREL 16" - 20" ID 60" OD NON MOTORIZED MANUAL EXPANSION HOLD DOWN ARMS 12" X .138" PA STRAIGHTENER MODEL SS127D SN X17243-03/90327 .020" - .138 THICKNESS CAPACITY 7 ROL...

CNC Controlled Drill Lines

The Excalibur 12 is the first monospindle gantry drilling line to process beams for the steel construction industry working with the Cantilever system The machine is hanging on and moves along its loading table T...

STANAT S-5-36

• Manufacturer: Stanat
• Model: S-5-36

36" (914mm) STANAT MODEL S-5-36 SLITTING LINE (7185) MACHINE # 7185 SPECIFICATIONS:MAXIMUM STRIP WIDTH: 36" CONSISTING OF THE FOLLOWING:UNCOILER:MANUFACTURER: STANAT CAPACITY: 6,000 LBS. HYDRAULIC EXPANSION AIR B...

Littell 12″ x .125″ x 4,000Lb Stk# 14457

• Manufacturer: Littell

BLISS slitting line, Model 12″ x .125″ x 4,000Lb Stk# 14457. 12" X 0.125" BLISS SLITTING LINE Stock # 14457 Mandrel Uncoiler Manual Expansion Drag Type Brake Slitting Head Powered Arbor Adjustment Sliding Outboar...

MARSHALL & WILLIAMS CO-EX SHEET EXTRUSION LINE

• Manufacturer: Marshall

Used Marshall & Williams Co-Ex Sheet Extrusion Line Consisting of the Following: 2.5" Welex 36/1 L/D with air cooled vented barrel, with 9.145/1 gearbox ratio including manual screen changer, water cooled screw a...

YODER 4E-36

• Manufacturer: Yoder

36" (914mm) x 4" (101mm) YODER SLITTING LINE (11295) MACHINE # 11295 MANUFACTURER: YODER MACHINE MODEL: 4E36 CAPACITY:COIL WEIGHT: 10,000 POUNDS EQUIPMENT:UNCOILER: SLIDING BASE WATER COOLED BRAKE SLITTER HEAD W/...

STAMCO 72" (1800mm) x .5" (12.7mm) x 60,000#

• Manufacturer: Stamco

72" (1800mm) x .500" (12.7mm) x 60,000# Stamco Slitting Line with 2 Heads (14069) Stock Number 14069 General Specifications:Strip Width: 20"-72" (508mm-1800mm) Coil ID: 20"-30" on entry, 24" on Exit (508mm-762mm ...