Used machine tools in Süd, 04928 Plessa Süd, Germany

OTT - JAKOB installation clamps

• Manufacturer: OTT

Installation clamp, installation clamping head OTT - JAKOB BA 600-2G 95.600.602.9.2 ( 9560060292 ) 372506 thread: M16 x 1.5, length: 30 mm New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch ORTLINGHAUS CLUTCHES serial no. 89-15483 with thrust bearing and additional shift ring New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch, multi-plate clutch ORTLINGHAUS CLUTCHES serial no. 39 used, tested !

WMW mechanical clutch

• Manufacturer: WMW

mechanical clutch, multi-plate clutch WMW, DRESDEN CLUTCH FACTORY 4 - TGL 42398 used, tested !

POLO Filter-Technik coolant reconditioning

• Manufacturer: POLO

Coolant treatment, inclined bed filter with magnetic filter POLO filter technology Inclined bed filter: SB-A0.4 Magnetic filter: MAF-0150 50 Hz used, tested !

PAGUS V-belt pulley

• Manufacturer: Pagus

V-belt pulley, stepped pulley PAGUS Ø 299 - 351 mm shaft length: 75 mm, groove width: 10 mm material: Aluminum ( pulley ), steel ( hub ) used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 70 mm x 150 mm Distance spindle center - upper edge of dovetail: 150 mm dovetail guide: 200 / 155 mm, height: 30 mm, width: 135 mm used, tested !

FLEXTORY torque limiter

• Manufacturer: FLEXTORY

Torque limiter, slip hub, slip clutch, safety clutch FLEXTORY GERMANY FT700 TORQUE LIMITER New !

SKF hydraulic nut

Hydraulic nut SKF HMV 12 New, preserved ! Thread: M60 x 2.0 | Hub: Max. 5 mm | P: max. 80 MPa ( 800 bar ) | Outer diameter: 125 mm | Width: 43 mm | Dimensions: 165 x 125 x 43 mm

PAGUS top slide

• Manufacturer: Pagus

Top slide PAGUS Holder for steel holder system MULTIFIX Size: B used, tested !

FENNER V-belt pulley

• Manufacturer: FENNER

V-belt pulley, Taperlock V-belt pulley FENNER 560-5 SPB with taper bush: TB 3525 New !

EMMERICH connecting rod

• Manufacturer: JOSEF EMMERICH PUMPENFABRIK GmbH

Connecting rod, connecting rod, push rod, drive rod, with crosshead bolt JOSEF EMMERICH PUMPENFABRIK GmbH 22337005 Connecting rod foot (split) with bearing bush for shaft diameter Ø 70 mm, bearing width: 70 mm Co...

LIQUI FILTER coolant reconditioning with magnetic roller

• Manufacturer: LIQUI FILTER GmbH

Coolant treatment, with magnetic roller and immersion pump LIQUI FILTER GmbH Magnetic roller: MW 210 without motor ! Immersion pump: BRINKMANN TB25/170-Z+095 3200 rpm 480 V 3AC 60 Hz New !

PAGUS constant velocity drive shaft

• Manufacturer: Pagus

Constant velocity drive shaft, cardan shaft, drive shaft PAGUS Outer shaft Ø 70 mm Flange Ø 152 mm Bolt circle Ø 1128 mm 6x bore Ø 12.5 mm New !

WMW clamping device

• Manufacturer: WMW

Clamping device, electro-hydraulic WMW Motor: VEM, ELMO type 1259.1/1 1400 rpm 0,04 kW 220 / 380 V 3AC used, tested !