Used machine tools in South Korea

VTM-1200YB

• new

Spindle structure for unbalanced workpieces Spindle bearing: VTM-2000YB ø260 mm VTM-2000YB ø200 mm + thrust bearing ø650 mm Loaded mass: VTM-1200YB 3,000 kg (including chuck) VTM-2000YB 5,000 kg VTM-2000YB 10,000...

MU-4000V

• new

The B axis of the trunnion table is equipped with a roller gear cam with high rigidity and suitable for high-speed operation, and the C axis is equipped with a direct drive motor that generates high torque even a...

MILLAC 468V Ⅱ

• new

The bed and column have a strong structure with optimally located ribs to prevent chatter and warping during heavy cutting. The sliding surface utilizes the traditional angular guide method on the entire axis to ...

MILLAC 44V II

• new

VTM-80YB

• new

MULTUS B200II

• new

GP/GA14/15W

• new

The grindstone traverse structure requires a stronger foundation structure than the table traverse structure. OKUMA's high rigidity technology satisfies these conditions, enabling the grindstone traverse structur...

[new] mu-400v ⅲ

• new

Okuma has named its machine tools "Green-Smart Machines" for their ability to autonomously achieve high productivity with both high accuracy and low energy consumption, and together with our customers, we are con...

MU-5000V

• new

Highly rigid, double-end supported trunnion table Ballscrew cooling (standard) for high degree of accuracy and high followability Indexing accuracy A-axis index accuracy/index return accuracy: ±0.68 sec/±0.40 sec...

MU-S600V

• new

GP/GA-34/44FⅡ

• new

MCV-AII

• new

MCR-AF

• new

The spindle is a ram-type structure with a large cross-sectional area of 350×350 mm, so it is rigid enough for powerful cutting. The Z axis is controlled by double ball screws driven from both sides of the ram. H...