Used machine tools in Limbourg, Belgium

Precision tool sharpening machine KAINDL

• Manufacturer: KAINDL

Support adjustable to 4 sides With scale for support pivoting Table model Stone Ø 400 mm, width 40 mm With switch

2006 Shrink-in inducion unit for tools ISCAR

Unit with water cooling Controlled over microprocessor

Column drilling machine FLOTT

• Manufacturer: Flott
• Model: SB15

Dimensions: Length: 700mm; Width: 400mm; Height: 1950mm Table is height-adjustable by 670mm at the column On base

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

Machine vice, 160 mm x 50 mm

With hand crank Clamping jaws 160 mm x 50 mm On graduated slewing ring With quick release

Grinder and cutter 2 x Ø200mm FLOTT

• Manufacturer: Flott

Dimensions: Length: 520mm; Width: 250mm; Height: 270mm With suction nozzle

Heavy vice for machines, 300 mm x 160 mm

• Manufacturer: WEYHERSMÜLLER

Maximum opening 300 mm Width of clamping jaws 160 mm With crank handle

Heavy vice for machine, 250 mm x 140 mm

Weight: ± 400 kg | Dimensions: length 570 mm, width 220 mm, height 110 mm | Maximum opening: ± 250 mm | Width of clamping jaws: 140 mm

Steel circular sawing machine, brand TRENNJÄGER, Ø blade 280 mm

Type: VC 260, serial number: HK2145 Motor ACE, type AM90544/2, serial number 37903232; 1,1/1,4 kW, 1410/2800 rpm, 380 V 5 speeds (2 electrical and 3 via cone pulley) Cut 45° turn left-right With cooling water pum...

Knuth UFM 2 Universal Milling Machine Milling Machine Tool Milling Machine

• Manufacturer: Knuth Werkzeugmaschinen
• Model: UFM 2

Technical Specifications X-axis travel (manual) 800 mm X-axis travel 750 mm Y-axis travel 300 mm Z-axis travel 400 mm Table size 1320 x 320 mm T-slots 5 x 14 x 63 mm Feed rates Y-axis travel (8) 20 - 360 mm/min Z...

Mikron WF 32 CH TNC355 universal milling machine tool milling machine milling machine

• Manufacturer: Mikron
• Model: WF 32 CH

Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control Technical specifications

Sandvik tool holder 340.360172 R175 Coromant holder turning holder

• Manufacturer: Halter

A used tool holder, type 340.360172 R175, manufactured by Sandvik Coromant, is for sale. Technical details: Note: For detailed technical data and processing instructions, we strongly recommend consulting the orig...