Used logging in Czech Republic

TP-1510 log sawing line

TP 1510 log cutting line TP 1510 head parameters, Main motor 75 or 55 kW, Infinitely variable machining speed, Saw wheel diameter 1.5 m, Maximum slip pitch of 1.05 m. Belt length 10.5 m, Belt width 205 mm, Hydrau...

Logs hopper with feeding to PP-1 band saw

The log magazine with feeder can be adapted to any model of band saw that has hydraulics installed. In case the saw is not equipped with hydraulics, it is possible to deliver it including a hydraulic distributor ...

Saw for sawing logs and production of sawn timber Slidet

Parameters: Steel frame 18 m stainless steel sliding rails Blade shaft 65 mm. and hydraulic blade guidance toothed hydraulic slide cylinder steel profile table 9 m long mechanical fencing device setup stationary ...

Stoll log holder - new - 3390260

• Manufacturer: Stoll

Width when opened 1.04 m Weight 235 kg

Log band saw G-700/470

Optional equipment - for an additional fee: - measuring the thickness of the ISP-010 section - electricity, water shut-off - stationary control panel - precut - smooth feed - full saw hydraulics – log pressure, l...

Log band saw A-1200 Z

Accessories at extra cost: • Pre-cut. • Cutting length extension. • El. Motor 11 kW / 15 kW / 18.5 kW • Electric feed roller. • Additional manual pressure. • Operator's seat • Operator's platform • Stationary con...

Log cutting saw PK-1300

• Manufacturer: drekos made

Log band saw A-1200, BIG 150.

Optional accessories: (depending on size) In addition, the A 1200 BIG 150 can be equipped with: increased power to 18.5kW or 22kW. Electrically controlled bark pre-cut. Microprocessor cutting thickness regulator ...

Tark series wood splitters from 30 to 100 cm log diameter

The Tark series of horizontal log splitters are designed for processing large logs. They are equipped with bronze sliding parts as standard, which ensure unrivaled performance and durability. They are available w...

Roundt Jumbo

• Manufacturer: Drekos Made s.r.o.

Roundt Jumbo - complete machine for the production of log logs Roundt Jumbo is designed to process larger diameter logs. With this model you can process diameters up to 70 cm. If necessary, we also produce Roundt...

ZDW-300

BT-300 router technical data Diameter of machined round (160) 180 to 300 mm Feed speed from 1 to 2m/min Milling head 8 knives. Total machine input 25 kW (34 kW) Length 12 m Width 1.6 m Height 1.6 m Main engine 22...

BT-200- 2G round milling cutter

• Manufacturer: BT

The mentioned machine processes logs or prisms from which it produces clean logs or stakes of various diameters from 60 to 200 mm, according to the setting of the required diameter on the machine. Technical data:...

Milling machine BT-180

• Manufacturer: BT

The mentioned machine processes logs or prisms from which it produces clean logs or stakes of various diameters from 60 to 180 mm, according to the setting of the required diameter on the machine. Technical data:...

BT-140 milling machine

• Manufacturer: BT

BT-140 weak log cutter The mentioned machine processes logs or prisms from which it produces clean logs or stakes of various diameters from 40 to 140 mm, according to the setting of the required diameter on the m...

K-50 milling machine

Milling machine K-50 of weak logs Milling machine K-50 of weak logs The K-50 milling cutter is intended for the production of round wooden bars, where the starting material is a prism (beam). This equipment offer...