Used lab frames

LabJaws™ CLR-FRAMEAS Small Lab Frame Kits

• Manufacturer: Ohaus Corporation

Vertically mounted, great for glassware set-ups in small laboratories or where space is limited. Frame measures 24 x 24" (610 x 610mm). Base is 18" (457mm) wide for stability. Base may be permanently mounted to b...

LabJaws™ CLR-FRAMEAM Medium Lab Frame Kits

• Manufacturer: Ohaus Corporation

Horizontal or vertical mounting, convenient for distillation or general set-up. Frame measures 24 x 48" (610 x 1219mm). Base is 18" (457mm) wide for stability. Specifications 30392305 30392324 Material Aluminum r...

LabJaws™ CLR-FHOODSS Fume Hood Lab Frame Kits

• Manufacturer: Ohaus Corporation

Choose from four kits specifically designed to fit within laboratory fume hoods. Rods are constructed of stainless steel with the exception of the Frame Connectors which are made of aluminum with a silicon finish...

LabJaws™ CLR-FRAMEAX Extra-Large Lab Frame Kits

• Manufacturer: Ohaus Corporation

Versatile, adaptable Extra-Large Lab-Frame measures 48 x 72" (1219 x 1829mm) and may be used either horizontally or vertically. Specifications 30392307 30392326 Material Aluminum rods with nickel-plated zinc conn...

100kN MTS 810 Model 318.10 Fatigue Frame 13292-01

Hydraulic Crosshead Lifts and Hydraulic Crosshead Locks MTS 22 KIP 3,000 PSI 6" Stroke Actuator, Model 318.10, S/N 784 with LVDT & Area = 7.57 in.2 (1) 15 GPM MTS/MOOG Model 252.25C-04 Servo Valve 22KIP (100 kN) ...

110KIP (500kN) MTS 318.50 Fatigue Load Frame 13056-00

MTS Hydraulic Lifts, Hydraulic Locks with Built-in Controls MTS 110KIP Actuator, Model 318.50, Assembly 484784-11 Rev A, A= 38.48 in^2 , 6" Stroke LVDT, S/N 1085964 (2) MTS Piston Accumulators MTS MOOG 15 GPM Ser...

22KIP (100kN) MTS 318.10 Fatigue Load Frame 12939-00

Hydraulic Crosshead Lifts and Hydraulic Locks MTS 22 KIP 3,000 PSI 6" Stroke Actuator, Model 318.10, S/N 10249815A with LVDT & Area = 7.57 in.2 MTS 298.12 3000 PSI Service Manifold with two MTS Model Piston Accum...

22KIP (100kN) MTS 318.10 Fatigue Load Frame 13235-01

Hydraulic Crosshead Lifts and Hydraulic Locks MTS 22 KIP 318.10 3,000 PSI 6" Stroke Actuator, S/N 10240375C with LVDT & Area = 7.57 in.2 MTS 3000 PSI Service Manifold with two MTS Model Piston Accumulators and On...

22KIP (100kN) Instron 8502 Fatigue Testing Load Frame 11793-02

• Manufacturer: Instron

Instron 22 KIP (100 kN) Dynamic 27 KIP (124 kN) Static Hydrostatic Bearing Actuator, Model AW 3140-1 with 6" (150mm) Stroke & LVDT S/N 904 MOOG Servo Valve Instron 22 KIP (100 kN) Model 2518-611 Dynamic Fatigue R...

1,125 lbf (5 kN) Instron 8511 Fatigue Frame 12250-01

• Manufacturer: Instron

1,125 lbf (5 kN) 3,000 PSI Hydrostatic Actuator with 6" Stroke & Internal LVDT 5kN Fatigue Rated Load Cell with Mounting Hardware 5 GPM Moog Servo Valve Hydraulic Crosshead Lifts with Manual Locks FOB Warren, MI ...

22KIP MTS 370.10 Landmark Fatigue Testing Load Frame 13287-01

• Manufacturer: MTS

Hydraulic Crosshead Lifts & Locks Controls MTS 100 kN 661.20H-03 Fatigue Rated Load Cell S/N 107166A MTS Model 609.10 Alignment Fixture S/N 10257203J (1) MTS Servo Valve with Valve Shut-Off Manifold, (1) MTS Serv...

110KIP (500kN) Instron Model 1334 Fatigue Load Frame 13154-02

• Manufacturer: Instron

Hydraulic Crosshead Lifts and Locks with Controls Instron 110 KIP Dynamic 220 KIP Hydrostatic Bearing Actuator, Model A488-76, 4" Stroke, 3,000 PSI, LVDT, S/N 463 Instron 500 kN Dynamic 1000 kN Static Fatigue Rat...

5.5 KIP (25 kN) Servo Test Structural Test Frame 12527-01

(1) Used 5.5 KIP (25 kN) ServoTest Hydrostatic Fatigue Actuator with ServoTest H-Frame Structural Test Frame and Bed Plate *(2) Identical Units Available ServoTest Actuator: EQUIPPED WITH: Rear and End Self Align...

22KIP (100 kN) MTS 309.10 Axial-Torsional Fatigue Load Frame 13158- 01

Hydraulic Crosshead Lifts & Hydraulic Locks with Controls MTS 22 KIP (100 kN) Axial, Model 204.63 3000 PSI Actuator with 7.54 in^2 Area and 6” Dynamic Stroke with LVDT MTS 10,000 in-lb Torsional, Model 215.41 300...