Building Filters
- Trusted Seller
KUKA Welding Robot / #84
- Manufacturer: Kuka
KUKA welding robot from December 2019, very little used. The robot is connected, it can be tested and inspected in Lithuania. Industrial robot KUKA KR8 R2100-2 arc HW Table Three-axis positioner KUKA KP3-H2H500 M...
Vilnius, Lithuania 
2019 HP Inc. HP JetFusion 540 3D Drucker
- Manufacturer: HP
On behalf of a customer, we are selling an HP JetFusion 3D printer as a spare parts carrier. Included: - 22x 4KG PA12 (NEW) - 3x Fusing agent - 6x Detailing agent - 1x Bright Fusing - 1x SERV ASSY-MCB-V5 PN...
- Trusted Seller
2008 MicroStep PLS 7501.25PG
- Manufacturer: MicroStep
This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene ...
Lithuania - Trusted Seller
Wall with 3-level filtration / #180
Wall 2000 x 2200 with 3-level filtration, filtration area 2000 x 1000. Working area 1 meter deep with recessed lighting IP65, and table for storage. Fan NEXT 211 1.1 kW ATEX explosion-proof, max 4500 m3/h mounted...
Vilnius, Lithuania 
CHC Navigation TX63
CHC Navigation TX63 is an operator-friendly 2D/3D indication control system for excavators. The system is designed to: facilitate the excavator's work, reduce fatigue, labor costs and at the same time ensure maxi...
Panevėžys, Lithuania
CHC Navigation NX510 Steer Ready
"CHC NAV" automatic steering system - a market-leading system with extremely accurate RTK signals up to 2.5 cm, headland turning function and no additional license fees. This system saves farmers' working time, f...
Panevėžys, Lithuania
CHC Navigation NX510 SE
"CHC NAV" automatic steering system - a market-leading system with extremely accurate RTK signals up to 2.5 cm, headland turning function and no additional license fees. This system saves farmers' working time, f...
Panevėžys, Lithuania
CHC Navigation PA-3 SE
The GPS receiver (antenna) output is used with a third-party control computer that has an RS-232 connector. Without using RTK communication technology, data can be obtained using the free GPS service EGNOS, with ...
Panevėžys, Lithuania
CHC Navigation TD63 PRO
"CHC Navigation TD63 PRO" is an operator-friendly 2D/3D bulldozer automatic control system. The system is designed to: facilitate the operator's work, reduce fatigue, labor costs and at the same time ensure maxim...
Panevėžys, Lithuania
CHC Navigation TG63
"CHC Navigation TG63" is an operator-friendly 2D/3D grader automatic control system. The system is designed to: facilitate the operator's work, reduce fatigue, labor costs and at the same time ensure maximum accu...
Panevėžys, Lithuania
CHC Navigation Guide 10
"CHC Guide 10" parallel steering system - designed for smaller farmers with smaller land areas or working with older equipment. This system scratches lines according to the set width of the implement and the oper...
Panevėžys, Lithuania
CHC Navigation EasyNAV
Possibility to design: trench, plane, slope with an excavator system or with a GNSS receiver. The price includes installation and calibration work. A 2-year warranty is provided. Prices may vary slightly due to c...
Panevėžys, Lithuania
CHC Navigation TX73
If the system does not have a planning bucket, 4 sensors out of 5 possible are installed. A .dxf file is readable only if it contains a "3D Face" element. If it does not contain a "3D Face" element, the file must...
Panevėžys, Lithuania
CHC Navigation NX612 Steer Ready
"CHC NAV" automatic steering system - a market-leading system with extremely accurate RTK signals up to 2.5 cm, headland turning function and no additional license fees. This system saves farmers' working time, f...
Panevėžys, Lithuania
CHC Navigation NX612
"CHC NAV" automatic steering system - a market-leading system with extremely accurate RTK signals up to 2.5 cm, headland turning function and no additional license fees. This system saves farmers' working time, f...
Panevėžys, Lithuania