Used inner in Switzerland

Trusted Seller
TURNING CENTER DMG MORI-SEIKI CTX 310 ECOLINE
- Manufacturer: DMG Mori
- Model: CTX 310 ECOLINE
- Spindle bore: 52 mm
nventory no. 2324001, machine comprising : Chip conveyor Olaer cooling unit Donaldson suction unit 1 multiplier collet holder (5x Pibomulti) No. X635T 2 side-rotating collet holder No. 0.5.941, 203-087 536 3 revo...
Biel/Bienne, Switzerland
Trusted Seller
2012 Temac slitter TSW 801/S
- Manufacturer: Temac
Temac slitter TSW 801/S year 2012 Materials: BOPP, OPP, CPP, PET, PVC (from 12 to 200 µ); LDPE, HDPE (from 30 to 300 µ); complex materials: PET+ALU+LDPE (from 60 to 150 µ); paper (from 20 – 180 gsm) Max parent ro...
Lugano, Switzerland
Trusted Seller
1990 Del Maglio (Italy) AZ 2 U.T. 1700
- Manufacturer: Maglio
Del Maglio (Italy) AZ 2 U.T. 1700 year 1990 Model: AZ 2 U.T. 1700 Maximum diameter of parent roll: 1200 mm Maximum diameter of the finished roll: 1200 mm Circular blades cutting system Integrated joint board Trim...
Lugano, Switzerland
Trusted Seller
2001 GILDEMEISTER CTX 400
- Manufacturer: Gildemeister
- Model: CTX 400
- Spindle bore: 52 mm
Control: HEIDENHAIN | Swing over bed: 500 mm | Maximum turning length: 640 mm | Turning diameter: 290 mm | Longitudinal travel (z-axis): 640 mm | Transversal strocke (x axis): 212 mm | Fixed tools turret: 12 | I...
Brügg, Switzerland
Trusted Seller
2002 SCHAUBLIN 180 CCN R-T
- Manufacturer: Schaublin
- Model: 180CCN R-T
- Spindle bore: 60 mm
Centre height: 275 mm | Distance between centres: 600 mm | Swing over cross-slide: 150 mm | Swing over bed: 600 mm | Turning length: 610 mm | Longitudinal travel (z-axis): 600 mm | Transversal strocke (x axis): ...
Brügg, Switzerland
2018 Support Frame for Cyclone
New. Unused. Adjustable for height. Demountable. Inner diameter for outlet: 155 mm | Total height: 190 cm | Weight between the pillars: 130 cm | Depth: 100 cm
$675 USD
Römerswil, Switzerland
Trusted Seller
2002 SCHAUBLIN 180 CCN R-T
- Manufacturer: Schaublin
- Model: 180CCN R-T
- Spindle bore: 60 mm
- Noise level: 75 dB
Control: GE Fanuc Series 18i-T | Centre height: 275 mm | Distance between centres: 600 mm | Swing over cross-slide: 150 mm | Swing over bed: 600 mm | Maximum turning length: 630 mm | Bar passage: 60 mm | Longitu...
Brügg, Switzerland
Trusted Seller
2015 Core Slitter CL 500
- Manufacturer: Core Link
- Maximum thickness: 10 mm
Core Slitter CL 500 year 2015 Manual emergency stop, start/stop, two-hand control for cutting Disconnected Immediately available About Core Slitter CL 500 year 2015 Location Information Available in region: The m...
Lugano, Switzerland
Trusted Seller
2001 SOMAB TRANSMAB 200
- Manufacturer: Somab
- Model: TRANSMAB 200
- Spindle bore: 35 mm
Control: NUM | Swing over bed: 260 mm | Taper in spindle: A2 4" | Spindle hole: 35 mm | Turret carriage: DUPLOMATIC | Longitudinal travel (z-axis): 300 mm | Transversal strocke (x axis): 125 mm | Number of posit...
Brügg, Switzerland
Trusted Seller
2001 SOMAB TRANSMAB 200
- Manufacturer: Somab
- Model: TRANSMAB 200
- Spindle bore: 35 mm
Control: NUM | Swing over bed: 260 mm | Taper in spindle: A2 4" | Spindle hole: 35 mm | Turret carriage: DUPLOMATIC | Longitudinal travel (z-axis): 300 mm | Transversal strocke (x axis): 125 mm | Number of posit...
Brügg, Switzerland
Trusted Seller
2002 LORENZ
- Manufacturer: Lorenz
Inner coil diameter: 460 - 520 mm | Outer coil diameter: 1900 mm | Max. coil weight: 7500 kg | Band thickness max.: 620 mm | Number of rolls: 9 | Roll diameter: 50 mm | Max. bandwidth: 620 mm | From: 1 mm | Up t...
Brügg, Switzerland
Trusted Seller
2001 SOMAB TRANSMAB 200
- Manufacturer: Somab
- Model: TRANSMAB 200
- Spindle bore: 35 mm
Control: NUM 1060 | Swing over bed: 260 mm | Taper in spindle: A2 4" | Spindle hole: 35 mm | Turret carriage: DUPLOMATIC | Longitudinal travel (z-axis): 300 mm | Transversal strocke (x axis): 125 mm | Number of ...
Brügg, Switzerland
Trusted Seller
SCHAUBLIN 70
- Manufacturer: Schaublin
- Model: 70
- Spindle bore: 20 mm
Centre height: 70 mm | Distance between centres: 275 mm | Swing over cross-slide: 85 mm | Swing over bed: 155 mm | Spindle hole: 12 mm | Inner taper type: 12 W | Machine's weight about: 25 kg | Length: 700 mm | ...
Brügg, Switzerland
Trusted Seller
2014 Curioni Sun Master 350
- Manufacturer: Curioni
Curioni Sun Master 350 year 2014 Brand: Curioni Min – max bag width with handle: 180 – 350 mm Weight of workable paper 80 – 130 g/m2 Machine is currently stopped, but connected Immediately available About Curioni...
Lugano, Switzerland
Trusted Seller
SCHAUBLIN 102 TO
- Manufacturer: Schaublin
- Model: 102
- Spindle bore: 18 mm
Centre height: 102 mm | Distance between centres: 375 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Inner taper type: 20 W | Voltage 50 hz 3x: 380 Volt | Spindle motor: 0.5 CV | Machine's weight...
Brügg, Switzerland