Used ibc in Hamburg, Germany

1150 liter conical container made of stainless steel 316

• Manufacturer: NEUE APPARATE- UND BEHÄLTERTECHNIK GMBH

remarks: 4-legged frame made of stainless steel 304; cone height approx. 650 mm; manhole diameter approx. 395 mm (screw connections of the manhole cover incomplete); hand lever of the disk tap bent

1000 liter conical container Bohle MC 1000, Aisi 304

• Manufacturer: LB Bohle

remarks: Container stands loose in a 4-foot frame, Aisin 304; cone height approx. 600 mm; manhole diameter approx. 620 mm; container with smaller dents

565 liter heatable container, Aisi 304

• Manufacturer: Azzini

Volume: 565 liter | Stand type: cage | Double jacket: available | Temperature control inside: electrical heater | Diameter inside: 1.077 mm | Diameter outside: 1.080 mm | Cylindrical height: 500 mm | Total heigh...

1000 Liter Container, Aisi 304

remarks: Frame, Fe (galvanized); diameter of manhole approx. 415 mm (for 2 containers, the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion)

1000 Liter Container, Aisi 316

remarks: Frame, Fe (galvanized); diameter of manhole approx. 415 mm (container with screwed screw holder made of Fe (galvanized) around the manhole collar); fastening screws of the manhole cover incomplete; dents...

1000 Liter Container, Aisi 304

• Manufacturer: Gempp & Unold AG

remarks: Frame, Fe (galvanized); Diameter manhole approx. 415 mm

1000 Liter Container, Aisi 316

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); diameter of manhole approx. 420 m; slight differences in design (e.g. manhole cover); in 1 container the upper bottom is slightly pressed in, the other container has a dent in the...

1050 Liter Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik (UCON)

remarks: Container bolted to a drive-under frame made of Fe (galvanized); butterfly valve very stiff (possibly defective); stacking support at the top partially slightly bent; container with small dents

1000 liter Container, Aisi 304

remarks: Foot frame, Fe (galvanized); wall height approx. 720 mm; Diameter manhole approx. 385 mm (the suspension of the manhole covers are no longer completely complete); Outlet diameter of pipe inside: 3 x 20 m...

590 liter bulk container, Aisi 304

remarks: Frame, Aisi 304; Internal dimensions approx. 1100 x 700 mm; wall height approx. 710 mm; Outlet approx. 100 x 100 mm with plastic components (probably Teflon); outlet design may vary for some containers (...

1000 liter container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: one of the containers has an additional outlet (25mm) with a butterfly valve in the cylinder (see photo)

1000 liter container, AISI304

remarks: Frame Fe (galvanized); Frame partly with signs of corrosion; Basic frame dimensions: 1030 x 1230 mm; Manhole diameter approx. 400 mm

1070 liter heat-/coolable container, Aisi 304

• Manufacturer: Behälter KG Bremen

Temperature control cylinder (dj): thermoplate temperature control bottom (dj): thermoplate remarks: Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the out...

800 liter container, Aisi 304

remarks: Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplet...

1000 liter Container, Aisi 304

remarks: Frame, Aisi 304; Container with dents, especially in the lower bottom; stack struts partially bent; 1 DN 40 connection in the container wall (see photos)