Used handling tools in Switzerland

2001 CISAM 2000DEF CT209 Ref No: 47795

• Manufacturer: CISAM

Object: 47795 | Controls: SIEMENS | Sheet width max.: 1400 mm | Mains voltage: 400 V | Mains frequency: 50 Hz | Design: single reel | Sheet width (min): 200 mm | Coil weight max.: 20 to | Max. diameter of c...

1995 Coil Reel Ref No: 45871

Hydraulically actuated upper clamp arm Motorised winder with geared motor Hydraulic opening of mandrel blades Coil lifting carriage with 250 mm stroke On the sides of the winder, there are two hydraulic cylinders...

Coil Reel Ref No: 43187

Object: 43187 | Design: single reel | Sheet width max.: 170 mm | Coil weight max.: 0.5 to | Max. diameter of coil: 1215 mm | Mandrel expansion range from: 365 mm | Mandrel expansion range up to: 525 mm | Fe...

TIGO D3R Ref No: 47877

• Manufacturer: TIGO

Object: 47877 | Design: single reel | Sheet width max.: 160 mm | Max. diameter of coil: 800 mm | Mandrel expansion range from: 200 mm | Mandrel expansion range up to: 520 mm

2018 AMT AHDR 500/1600 Ref No: 53004

• Manufacturer: AMT
• Model: AHDR 5001600

Object: 53004 | Design: twin reel | Sheet width max.: 150 mm | Coil weight max.: 1200 to | Max. diameter of coil: 1600 mm | Mandrel expansion range from: 250 mm | Mandrel expansion range up to: 650 mm | Mai...

1972 BRONX Ref No: 43600

• Manufacturer: Bronx

direction left-right - Complete line including handling and saw - Conventional control - Manual roller adjustment

Water Descaler

Water Descaler Before entering the BDM - Break Down Mill -, the starting materials are descaled by means of a high-pressure (21 bar) water descaler. Scale pit handling equipment is also made available. *** Extra ...

PRESS “LUTHY” SCREW 25 MM

Manufacturing number Manufacturing year Manufacturing origin Swiss Voltage 380/50/3 Netweight see below Custom position 8462.99 30 Colour Dimensions : : Diameter screw 25 mm Height 580 mm Width with ha...

1980 ABBEY RS 30 Ref No: 54612

• Manufacturer: Abbey

For sale is a fully serviced and excellently maintained tube welding line . The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, ma...

2020 Steinberg lifting magnet (2x)

• Manufacturer: Steinberg

Online auction of best brands sheet metal working machines and tools (e.g. 2014 TRUMPF TruLaser, TruMatic, TruBend press bending, punching and fiber laser machines, OTC robotic welding, ERNST deburring, GEORG FIS...

Scae Dimatic 101/88

• Manufacturer: Scae Dimatic 101/88

Scae Dimatic 101/88 Visible in production Immediately available About Scae Dimatic 101/88 Location Information Available in region: The machines are not located in Lugano, our office is in Lugano handles this inq...

2015 Somtas slitter rewinder model SLX 1600

• Manufacturer: Somtas

Somtas slitter rewinder model SLX 1600 year 2015 Visible in operation Immediately available About Somtas slitter rewinder model SLX 1600 year 2015 Location Information Available in region: The machines are not lo...

2000 Cavalleri sheeter model CT 15

• Manufacturer: Cavalleri

Cavalleri sheeter model CT 15 year 2000 With photocell Visible in production Immediately available About Cavalleri sheeter model CT 15 year 2000 Location Information Available in region: The machines are not loca...

2019 Scae Dimatic ETH 471 HG/110

• Manufacturer: Scae

Scae Dimatic ETH 471 HG/110 year 2019 For the production of wicket bags with die-cut handle positioned on the top or on the side of the bag Mechanical speed (without film): 300 cycles/min Min – max wicket holes d...

2015 Core Slitter CL 500

• Manufacturer: Core Link
• Maximum thickness: 10 millimeter

Core Slitter CL 500 year 2015 Manual emergency stop, start/stop, two-hand control for cutting Disconnected Immediately available About Core Slitter CL 500 year 2015 Location Information Available in region: The m...