Used handling tools in Netherlands

Trusted Seller
COLOMBO & LENNA - 4J-1500
- Manufacturer: Colombo
Length: 1500 mm | Width: 500 mm | Height: 1500 mm | Weight: 900 kg
Babberich, Netherlands
Elevator - 3-1/2'' - DP - Centre Latch
- Hours: 20,207 hour
Elevator – DP – Center Latch Drill Pipe Elevator Centre Latch 3-1/2'' more details
Middenmeer, Netherlands
Casing - 4-5/8'' - 6-1/2'' - Model - Brand
Drill Pipe Slip, 4-5/8'' - 6-1/2''
Middenmeer, Netherlands
Elevator - 3-1/2'' - DP - Centre Latch
- Hours: 20,205 hour
Elevator – DP – Center Latch Drill Pipe Elevator 3-1/2'' Centre Latch more details
Middenmeer, Netherlands
Elevator - 3-1/2'' - DP - Centre Latch
- Hours: 20,208 hour
Elevator – DP – Center Latch Drill Pipe Elevator 3-1/2'' - DP - Centre Latch more details
Middenmeer, Netherlands
Trusted Seller
M1099 Kader Marking Table PRV 55 Used
M1099 Kader Marking Table PRV 55 Used 1000 x 1000mm with 2 x 4 adjustable centres for marking out gutters Kader Typ PRV55 2 x 4 adjustable centres Measure of centre points Table: 1000 x 1000 mm Material: zinc / c...
Dodewaard, Netherlands
Trusted Seller
M1291 Zinc table Used
M1291 Zinc table Used 1000 x 1000 mm, on castors Table: 1000 x 1000 mm Material: zinc/copper/steel/aluminium, etc.
Dodewaard, Netherlands
Trusted Seller
M1424 JÖRG Coil Carrier 9001 Used
- Manufacturer: Jörg
The M1424 JÖRG Coil Carrier 9001 Used for transporting coils of up to 250 kg. Includes ‘trolley function’ for placing the coil without lifting equipment. Equipped with an adjustment bolt to level the coil. A fold...
Dodewaard, Netherlands
Safety Clamp, Type MP - 15 segements
Total 15 Segments, 2x latch link, 2x side bar link c/w screw Complete with case.
Middenmeer, Netherlands
Trusted Seller
JÖRG Multiple Decoiler 2910 - 2952
- Manufacturer: Jörg
The JÖRG Multiple Decoiler 2910 - 2952 allows the operator to choose from 4 or 6 different coils to cut. After hanging the coils in the frame, the operator can change the plate by operating the push buttons, with...
Dodewaard, Netherlands
Trusted Seller
JÖRG Coil Carrier 4902-50
- Manufacturer: Jörg
The JÖRG Coil Carrier 4902-50 is an simple but strudy coil carrier for support the coil during uncoiling. JÖRG Coil Carrier 4902-50 – 300 kg Coil width: 1050 mm Support capacity 300 kg For zink, aluminium, coper,...
Dodewaard, Netherlands
Trusted Seller
JÖRG Decoiler 2952
- Manufacturer: Jörg
The JÖRG Decoiler 2952 has a hydraulic tension mandrel with a sensor under the coil. Standard with: Frequency-controlled motor Loop control with sensor under the coil Operation with portable control box on cable ...
Dodewaard, Netherlands
Trusted Seller
JÖRG Decoiler ASM
- Manufacturer: Jörg
The JÖRG Decoiler ASM Motorized, cantilever fully steel welded frame and adjustable brake to prevent auto unwinding. The mandrel is selve centering so that different coil ID are simple to change. Cantilever, Coil...
Dodewaard, Netherlands
Trusted Seller
JÖRG Coil Carrier 4923-50
- Manufacturer: Jörg
The JÖRG Coil Carrier 4923-50 is an simple but strudy coil carrier for support the coil during uncoiling. JÖRG Coil Carrier 4923-50 – 300 kg Coil width: 1250 mm Support capacity 300 kg For zink, aluminium, coper,...
Dodewaard, Netherlands
Trusted Seller
JÖRG Decoiler AS 1,5/1250
- Manufacturer: Jörg
The JÖRG Decoiler AS 1,5/1250 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ...
Dodewaard, Netherlands