Building Filters
- Trusted Seller

Mohr Extrusion Press | Mohrtek MEP-120L
- Manufacturer: Mohr
Units is USED. Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actu...
Hiram, OH - Trusted Seller

1976 SCHLOEMANN 1250 Ton EXTRUSION PRESS
- Manufacturer: SCHLOEMANN
1250 Ton SCHLOEMANN EXTRUSION PRESS (13664) MACHINE 13664 Manufacturer: Schloemann, Germany This is the extrusion press only. It does not include downstream equipment or billet furnace. **It was able to Press 300...
North Branford, CT - Trusted Seller
Brown Trim Press, Model T-300
- Manufacturer: Brown
- Model: T-300
Brown Trim Press, Model T-300 Used Brown model T-300 trim press, 11.75" x 37.5" wide cutting window, driven by ac motor, with canopy, control panel, 480 volt, serial# 8791.
Cleveland, OH - Trusted Seller

1951 SCHULER X150 Impact Extrusion Press
- Manufacturer: Schuler
Manufacture: - Schuler - Model X150 - New 1951 - Rebuilt 2014 Cans/Tubes per Minute: - 120 cpm Product Last Run: - Aluminum parts - Diameter - 13.5mm, 28mm, 35mm - Length - 180mm Weight and Dimensions: ...
Banner Elk, NC - Trusted Seller

1976 SCHLOEMANN SIEMAG 1250 ton EXTRUSION PRESS
- Manufacturer: SCHLOEMANN SIEMAG
Manufacture: - Schloemann Siemag - New - 1976 Billet Size: - 7" (178mm) Type of Press: - Aluminum & Copper (designed for the addition of a piercer) - Horizontal, oil hydraulic, 4-column Specifications: - Main ...
Banner Elk, NC - Trusted Seller

UBE 1800ton Copper Extrusion Press
- Manufacturer: UBE Industries
FOR SALE !!! 1800mton UBE Brass/Copper Piercing Extrusion Line for Billet and Tube FOR SALE !!! Manufacture: - UBE - New - 1983 - Last major upgrade - 2010 - Decommissioned - 2023 Billet Size - Diameter =...
Banner Elk, NC - Trusted Seller

SMS 3500 MT Aluminum Extrusion Press Line (14592)
- Manufacturer: SMS Eumuco
One Used 3500 MT SMS Aluminum Extrusion Press Line (14592) One Used 3500 MT SMS Aluminum Extrusion Press Line Stock #14592 1.2 Aluminum rod specification φ305x1300 1.3 Holding ingot cylinder φ315x1350 1.7 Dischar...
North Branford, CT - Trusted Seller

SMS 8200 MT Aluminum Extrusion Press Line (14593)
- Manufacturer: SMS Eumuco
One Used 8200 MT SMS Aluminum Extrusion Press Line (14593) One Used 8200 MT SMS Aluminum Extrusion Press Line Stock # 14593 1. Mechanical configuration:1.1 The nominal total extrusion force of the equipment is 82...
North Branford, CT - Trusted Seller

4,000 ton Schloemann Dbl Acting Extrusion Press w/Piercing,
Additional info: (2) 130 liters/min Pumps Main ram forward (diameter x stroke): 1,289mm x 2,160mm x,1ea Main ram return,(diameter x stroke): 292mm x 2,160mm x 2ea Pierce forward (diameter x stroke): 540mm x 2,160...
Rockville Centre, NY - Trusted Seller

SCHLOEMANN (SMS) 4000 Ton Extrusion Press w/Piercer (14517)
- Manufacturer: SCHLOEMANN (SMS)
Used SCHLOEMANN (SMS) 4000 Ton Water Hydraulic Extrusion Press with Piercer available. This is a very special press designed not for Aluminum but for high speed high pressure extrusions of hard alloys material su...
North Branford, CT - Trusted Seller

2007 W+D 627 KC
- Manufacturer: W+D
- Web+Blank - W+D 191 paper splicer - Complete Cut - PC - Dynatec Extrusion Gumming - 2 colors in the machine - Outside side seam - Double Patcher
Marietta, GA - Trusted Seller

FL Smithe MO-MP-PC-Silicone
- Manufacturer: FL Smithe
- Rebuilt and upgraded. in 2014 - 2 outside printing units - Dextrin - Silicone attachment (Hot Melt) - Valco Extrusion gumming - Shaft drive/Timing belt upgrades - Magnetic PC and Counterweight anvil
Marietta, GA 
Complete Sheeting Line – 24" Cooling Stack, Puller Cutter, Trim Press & Heater
- Manufacturer: Vinyletech
40425041 Used 24" Vinyletech Abbottstown Sheeting Cooling Stack, Model D9060. Approximately 24" wide x 12" diameter cooling drum, with 21" wide x 12" diameter mating drum, 24" wide x 8" diameter idler drum, seria...
Belvidere, IL
Hufford A-12 60 Ton CNC Stretch Forming Press
- Manufacturer: Hufford A-12 60 Ton CNC Stretch Forming Press
One (1) Used A-12 Stretch Wrap Forming Press ***Recently mechanically rebuilt and re-controlled with Siemens SIMATIC HMI touch screen controller, and upgraded hydraulic system. Capacity Metric Tonnage 59 Tons ...
New Fairfield, CT
Hufford A-5 Stretch press
- Manufacturer: Hufford
Catalog Specifications: Capacity 12 Tons Table Dimensions 30” x 65” Table Height 35.5” Maximum Part Length Formed 219” Minimum Part Length Formed 10” Maximum Sheet Width Formed 10” Maximum Die Height 20” Maximum ...
New Fairfield, CT
