Building Filters
- Trusted Seller
SRI ESD
- Manufacturer: SRI
SRI ESD voltmeters, though specific models are difficult to find information on, are likely high-impedance, high-voltage measuring instruments used to verify and calibrate ESD simulator guns. These ESD guns are u...
Cary, NC 
- Trusted Seller
Schaffner NSG 437
- Manufacturer: Teseq - Schaffner
- Model: NSG 437
30 kV Electrostatic Discharge Test Gun The NSG 437 is a 30 kV Compact ESD Simulator with microprocessor based, large touch sensitive LCD panel, built-in HV relay for contact-discharge, mains operation. The NSG 43...
Cary, NC 
NoiseKen ESS-2000
- Manufacturer: NoiseKen
- Model: ESS-2000
The Noiseken ESS-2000 Electrostatic Discharge Simulator is a fully programable 30kV ESD Simulator that allows both manual and fully automated control, up to 30kV. The ESS-2000 simulator can store up to 99 tests i...
Tektronix TDS7254B
- Manufacturer: Tektronix
- Model: TDS7254B
- Scope bandwidth: 2,500 MHz
- Channels number: 4 сhannels
The Tektronix TDS7254B 2.5 GHz, 20 GS/s, Digital Phosphor Oscilloscope Ideal for IEC 61000-4-2 is a favorite among EMC labs for calibrating and verifying the waveform generated by ESD simulator guns. It's high sa...
Farmingdale, NJ
Schaffner NSG438
- Manufacturer: Teseq - Schaffner
- Model: NSG438
ESD Simulator 30MHz to multi-GHz The NSG 438 30 kV ESD Gun by Schaffner / Teseq fulfills the requirements of all known ESD standards. The basic model is type approved and calibrated in conformity with . Air and c...
Farmingdale, NJNoiseKen ESS-S3011
- Manufacturer: NoiseKen
30kV ESD Simulator 12-00008a: Round Discharge Tip | 12-00007a: Conical Discharge Tip | Gt-30r: Discharge Gun
Farmingdale, NJSchaffner NSG431
- Manufacturer: Teseq - Schaffner
Details The Teseq Schaffner NSG431 ESD Gun offers precision electrostatic discharge testing from 2 to 21 kV, with a swift rise time of 5 ns ±30 % at 2 kV, a discharge capacitor of 150 pF ±10 %, and a discharge re...
Dublin, Ireland
Kikusui KES4021
- Manufacturer: Kikusui
Details The Kikusui KES4021 Electrostatic Discharge Simulator allows immunity testing on electrical and electronic devices by simulating a direct or indirect electrostatic discharge from a charged human operator....
Dublin, Ireland
WHA3000P Multi-function hot air desoldering station
- Manufacturer: 德国威乐/Weller
Introduction: 700W hot air table with integrated turbine motor and integrated vacuum device. LCD display, more convenient setting and monitoring of various parameters/built-in vacuum pen/ESD protection. Product ...
Beijing, China
Noiseken ESS-2000AX
- Manufacturer: NoiseKen
Noiseken ESS-2000AX Details Noiseken ESS-2000AX The ESS-2000AX ESD Simulator generates highly consistent, repeatable ESD pulses up to 30kV in both contact and air discharge modes. Compliant with IEC61000-4-2 sta...
Lake Mary, FL
New Teseq Schaffner NSG 438A
- Manufacturer: Teseq - Schaffner
Teseq Schaffner NSG 438A Details Teseq Schaffner NSG 438A ESD Gun Simulator System The 438A has an elegant has solution to discharge the EUT using a relay circuit which dissipates the residual voltage by connecti...
Lake Mary, FL
Kikusui KES4021A
- Manufacturer: Kikusui
Kikusui KES4021A Details Kikusui KES4021A Manual Control Electrostatic Discharge Simulator (Gun Stand sold at additional cost) Electrostatic discharge (ESD) is a very common phenomenon. Yet, if the resulting arc ...
Lake Mary, FL
Teseq Schaffner NSG438A
- Manufacturer: Teseq - Schaffner
Teseq Schaffner NSG438A Details Teseq Schaffner NSG438A ESD Gun Simulator System The 438A has an elegant has solution to discharge the EUT using a relay circuit which dissipates the residual voltage by connecting...
Lake Mary, FL
Haefely Technology ONYX 30
- Manufacturer: Haefely
Haefely Technology ONYX 30 Details Haefely Technology ONYX 30 The Haefely-Hipotronics ONYX 30 ESD gun is the replacement for the PESD 3010. This electrostatic discharge simulator is available in 16kV or 30kV mode...
Lake Mary, FL
