Used ecm in osutoraria

ORIENTAL MOTOR SCM540GV-ECM / 5GV18B AC SPEED CONTROL MOTOR

• Manufacturer: Oriental Motor

This listing is for a USED Oriental Motor SCM540GV-ECM + 5GV18B. AC speed control motor set including a 40 W induction motor and 18:1 gear head. Designed for precise speed regulation in industrial automation syst...

Azbil Control Motor - Ecm3000f0130

• Manufacturer: Azbil - Yamatake

New, Control Motor, Made In China Name: Control Motor | Arrival date: 09-30-2025 | Dimensions l x w x h (inches): 8 x 8 x 11 | Weight (lb.): 7 | Available quantity: 1

Denison 024-59242-0 T6ECM 062 B25 3L00 C1 Hydraulic Vane Pump

• Manufacturer: Denison

“New without Factory Packaging” Model number: 024-59242-0 T6ECM 062 B25 3L00 C1 | Mpn: 024-59242-0 T6ECM 062 B25 3L00 C1 | Shipping weight: 122 lbs | Shipping dimensions: 19 x 12 x 12 in | Reference sku: 1686570

ECM TECHNOLOGIES VACUM CARBURIZATION FURNACE NEW 2013

• Manufacturer: ECM TECHNOLIGIES

1-USED ECM TECHNOLOGIES VACUM CARBURIZING FURNACE SERIAL NUMBER 3100-500 DATE OF MFG. 2013 STK#104132 =========================== NEW COST WAS SEVERAL MILLION SUPER SPECIFICATIONS WHILE OBTAINED FROM SOURCE...

Square D PowerLogic ECM-2000 Ethernet Communications Module Class 3020 ECM2000 (AH1074-1)

• Manufacturer: Square D

Square D PowerLogic MPN: ECM-2000 USED Square D PowerLogic Ethernet Communications Module ECM2000 430359 MAC: 00-20-BD-06-91-17 DOM: 07/30/99 HR: 1.1D | FR: 05Mar99 Approximate Weight: 3 lbs. Approximate Dime...

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4,356 m
• Mast Height: 5,753 m

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

2003 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Comes with YH70, not currently installed but will be mounted for transport – Batteries need charging or replaced so could not stand machine up at time of photos. – Missing wall and doors need to be reattached –...

1999 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter -Only known issue is the engine Boggs down under a hydraulic pressure load everything works as intended but noticeable lack of performance due to lower engine rpm’s . Possible fuel i...

2000 Ingersoll Rand ECM490

• Manufacturer: Ingersoll Rand
• Model: ECM-490
• Horsepower: 250 hp
• Drill Pipe Diameter: 3,050 mm

– Cummins 6CT8.3 – Tier 2 – 200CFM/140PSI Air – YH70 Drifter – Setup for T38 – 12,667 engine hours – Drifter Rebuild @ 12,518 Hours – New feed chain & sprockets @ 12,348 hours – 1,000 hour service done @ 12,667 h...

2005 INGERSOLL_RAND ECM 370

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

1996 INGERSOLL-RAND ECM690

• Manufacturer: Ingersoll Rand
• Model: ECM-690
• Horsepower: 310 hp

4.5” – 5.5” Inch Class CATERPILLAR Diesel Engine YH Series Drifter YH110V Hydraulic Drifter Set up for T51 CAT 3306 Diesel Engine Extendable Boom Rod Changer

2005 ATLAS COPCO ECM585

• Manufacturer: Atlas-Copco
• Model: ECM 585
• Horsepower: 190 hp
• Drill Pipe Diameter: 45 mm

2.5 – 3.5 Inch Class Montabert HC109 Drifter Excellent Condition Engine Hours 5416.2 Percussion has ONLY

2001 INGERSOLL-RAND ECM680

• Manufacturer: Ingersoll Rand
• Model: ECM-680
• Horsepower: 260 hp
• Drilling depth: 30 m

HCR-150 DRIFTER CUMMINS 6CTA8.3 AUTO ROD CHANGER BOOM SWING HOSE REEL AUTO DRILLING SYSTEM REAR MIRROR