Used die machine

CINCINNATI MILACRON VT165-13 Die Height Adjustable Tie Bar Nut Used

• Manufacturer: Cincinnati

Removed from: 165 Ton Cincinnati Injection Molding Machine Model: VT165-13 Serial: 4036A61/92-12 Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon requ...

ENGEL ES2000/450-37 Die Height Adjustable Tie Bar Nut Used

• Manufacturer: Engel
• Model: ES 2000/450

Removed from: 450 Ton Engel Injection Molding Machine Model: ES2000-450-37 Serial: 6430-450-94 Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon reques...

Hydraulic 12 Ton Press 8" Stroke Punch Die C Frame 10" Bore 3000PSI 7.5Hp 3Ph

Used, in Working Condition. We did not cycle. Has PLC and lots of safety sensors. Powers up but we were not able to do a cycle. Hydraulic power unit. 7.5hp 230/460V motor. Wired for 460V 3 phase. Looks to be a 8"...

National 1/4" HS DSSD

• Manufacturer: National

Maximum cutoff diameter: 1/4" | Maximum shank length: 1-3/8" | Maximum cutoff length: 2-3/8" | Maximum production: 265 PPM | Electrics: AC Motor and Controls | Approx. weight: 9000 lbs | Approx. floor size: 8' x...

1982 TOKO TKL-350

• Manufacturer: TOKO

Maximum cutoff diameter: 13mm | Maximum cutoff length: 210mm | Ko stoke: 180mm | Maximum production: 35 PPM | Electrics: AC Motor & Controls | Approx. weight: 28,700 lbs | Approx. floor size: 9'L x 13' W x 5' H ...

1981 NAKASHIMADA MH-05

• Manufacturer: Nakashimada
• Model: MH-05

Maximum cutoff diameter: 7/64" (2.5mm) | Maximum cutoff length: 3/4" (18mm) | Maximum shank length: 1/2" (12mm) | Maximum production: 250 PPM | Approx. weight: 3,000 lbs | Equipped with: With PKO & Bushing Cutoff

90?? DIE, 1-1/4 in WIDE X 154 in LONG X 3 TALL, V: 1/2 in X 1/4 in #83858

SPECIFICATIONS: SPECIFICATIONS SUBJECT TO VERIFICATION

1970 1,200 ton Hatebur AMP-70 4-Die, max bar dia

Still installed and under power for inspection Very Good working condition Available for immediate inspection and delivery

1981 NAKASHIMADA MH-05

• Manufacturer: Nakashimada
• Model: MH-05

Maximum cutoff diameter: 7/64" (2.5mm) | Maximum cutoff length: 3/4" (18mm) | Maximum shank length: 1/2" (12mm) | Maximum production: 250 PPM | Approx. weight: 3,000 lbs | Equipped with: With PKO & Bushing Cutoff