Used die casting in mekishiko

2005 TOSHIBA 800 TON HIGH PRESSURE DIE CAST LINE

• Manufacturer: Toshiba

The Toshiba 802 Die Cast Machine is a high-pressure die casting machine used for producing metal parts by forcing molten metal into a mold cavity under high pressure. This particular model is a cold chamber die c...

STAHL TILT & POUR PERMANENT MOLD GRAVITY DIE CASTING

• Manufacturer: Stahl

Stahl Tilt & Pour Permanent Mold Gravity Die Casting Machine, 46" x 36" Platen, Hydraulic Pump, Controls

2022 Colosio PFO 400 Horizontal Cold Chamber Die Cast Machine

• Manufacturer: Colosio

Equipped With: Colosio Full Control System Integrated Colosio Rotofast Automatic Ladle Relbo Rapid 75 Automatic Die Sprayer

Birch 20 Ton 4-Post Vertical Hydraulic Die Casting Trim Press 25Hp 460V

• Manufacturer: BMC Birch Machinery Company

Trim press in good working condition. Tested in our shop. 20-ton capacity. 36" stroke length. Press plate and table thickness is 2-7/8" Press is set up with 4 limit switch stops. Panelview 550 touchscreen contr...

2020 Low Pressure Die Casting (LPM) LPMBP3-2100 TX Die Casting Machine ()

Low pressure die cast-cap 54pc/24

Prince Model 940 950 Ton Cold Chamber Horizontal Die Casting Machine (1991)

Prince Model 940 950 Ton Cold Chamber Horizontal Die Casting Machine (1991) Model 940 Locking Tonnage 950 Tons Space Between Bars 40.0" Tie Bar Diameter 8.0" Tie Bar Centers 48.00" Stationary Platen (Tx W X H) 15...

avnet dcmt h20e die casting machine

• Manufacturer: AVNET

The Avnet DCMT H20E Die Casting Machine is a reliable piece of industrial equipment designed for precision and efficiency in die casting operations. This used model from AVNET maintains its robust quality, suitab...

25 TON HERMAN SCHWABE “D” SWING-ARM HYDRAULIC DIE CUTTING CLICKER PRESS

• Manufacturer: Herman-Schwabe

25 TON HERMAN SCHWABE “D” HEAVY-DUTY SWING-ARM HYDRAULIC DIE CUTTING CLICKER PRESS - two hand push button controls - “C” frame design - 3” stroke Imperial Metric 25 TON HERMAN SCHWABE HEAVY-DUTY SWING-ARM HYDRAUL...

2005 TOSHIBA DC800J-MS

• Manufacturer: Toshiba
• Model: DC800J-MS

INCLUDES: 802 QUENCH TOSHIBA 802 TRIM PRESS TOSHIBA Die Locking Force: 8,000 kN (approximately 800 metric tons) Injection Speed: 0.05 to 6.5 meters per second Tie-Bar Spacing: 930 mm x 930 mm Mold Thickne...

IDEM Rear Escape Rotary Handle (Die Cast Steel) UGB-RERH-M

• Manufacturer: IDEM

All parts ordered before 3:30 pm (EST) typically ship same day via UPS, FedEx, or USPS! If the order is placed after 3:30 pm and you still would like it send out same day, feel free to reach out to us and we will...