Used decoiler in Switzerland

2002 LORENZ

• Manufacturer: Lorenz

Inner coil diameter: 460 - 520 mm | Outer coil diameter: 1900 mm | Max. coil weight: 7500 kg | Band thickness max.: 620 mm | Number of rolls: 9 | Roll diameter: 50 mm | Max. bandwidth: 620 mm | From: 1 mm | Up t...

KOHLER 10.120 B

• Manufacturer: Kohler

Number of rolls: 19 | Roll diameter: 18 mm | From: mm | Up to: 2 mm | Voltage 50 hz 3x: 380 Volt | Driving motor (motor power): 1 kW | Length: 800 mm | Width: 700 mm | Height: 1400 mm

1991 FEINTOOL MFA 2500 Ref No: 40452

• Manufacturer: FEINTOOL

+ Control system completely renewed in 2015 Object: 40452 | Last overhaul: 2015 | Controls: BECKHOFF | Drive system: knuckle-joint | Feedstock transport direction: left to right | Total force (nominal): 250 to |...

2003 FEINTOOL MFA 1600 Ref No: 42972

• Manufacturer: FEINTOOL

!! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ba...

1968 FEINTOOL GKP 50/80 Ref No: 32057

• Manufacturer: FEINTOOL

Object: 32057 | Total force (nominal): 80 to | Stroke: 50 mm | Stroke rate (min.): 28 /min | Stroke rate (max.): 72 /min | Nominal force: 12 to | Lower table (left-right): 420 mm | Lower table (front-back)...

1976 FEINTOOL HFA 6300 Ref No: 32866

• Manufacturer: FEINTOOL

+ press rebuilt in 2011 with new hydraulics and new electrics + roller feeders with manual height adjustment + press frame reinforced with 4 tie rods complete line currently dismantled and lying on stocks

2007 SCHMID HSR400 Ref No: 51084

• Manufacturer: Schmid
• Model: HSR400

including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers

2002 FEINTOOL HFA 8800 PLUS Ref No: 36813

• Manufacturer: FEINTOOL

Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...

1990 LAUFFER EPT 100 Ref No: 49540

• Manufacturer: LAUFFER

Equipment: - Cutting impact dampening - Hydraulic die cushion and ejector - CNC - gripper feed (200x900x1700) - Soprem belt system (optional) see article no. 3-49541

2008 MÜLLER PMLE 250 X 2000 R-HK Ref No: 50719

• Manufacturer: Muller

Machine hours: 20,391 h (operating hours) Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm Equipment: - External connecting rods for high tilt stability - Hydraulic overload protection - Press force...

1989 ARISA SC2-160-150-S Ref No: 43998

• Manufacturer: ARISA

Servo feeder and Siemens control with touch screen, simodrive and simoreg. All documentation, including retrofitting

2003 SCHULER GRÄBENER GMO 2-315-2000-160 Ref No: 44872

• Manufacturer: Schuler

Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR ...

1994 KAISER KSTU ZA 2000-15P Ref No: 43706

• Manufacturer: Kaiser

+ Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...

DEVIDOIR / ENROULEUR MOTORISE

DECOILER / REWINDER MOTORISED SKU: 2250039 Tag: Machines

FEINTOOL HFA 400 Ref No: 56145

• Manufacturer: FEINTOOL

Accessories: roller feed, tape feed, decoiling. Object: 56145 | Total force (nominal): 400 to | Stroke rate (max.): 150 /min | Approximation velocity max.: 120 mm/s | Working velocity min.: 5 mm/s | Working v...