Used cutting in USA

2" Haven model 620 Klean Cut Tube Cut Off 19009A

• Manufacturer: HAVEN

Machine cuts without material loss between parts, and makes Burr Free cuts with little to no distortion. Current Cost of similar machine in excess of $300,000.00.

DALHSTROM Cut To Length Line

• Manufacturer: DALHSTROM

Equipped With: Uncoiler Coil Car Flattener/Leveler Adjustable Hump Table Crop Shear Stacker

2008 Zund L 3000 CV Cutting System

• Manufacturer: Zund
• Model: L-3000

2008 Zund L 3000 CV Cutting System ALI Reference #: 106152 Details: - Max area: 118" x 71" - rugged, welded construction - all axes with highly dynamic DC-motor drives - knife and service friendly acrylic tabl...

Graphtec Cutting Plotter - Fc2250a-60vc

• Manufacturer: Graphtec

Lens (bofm001), Made In Japan, *contains 2 Pieces Name: Cutting Plotter | Arrival date: 10-31-2025 | Dimensions l x w x h (inches): 51 x 37 x 34 | Electrical: 50/60/100/120/200/240 | Weight (lb.): 60 | Available ...

Keen Cut Excalibur 1000 63" Substrate Cutter

• Manufacturer: Excalibur

Keen Cut Excalibur 1000 63" Substrate Cutter Materials cut: Mountboard; Conservation board; MDF ≤ 3/32"; Cast acrylic / Plexiglas ≤3/32"; Glass ≤ 1/4"; Cardboard ≤ 13mm (1/2"); Cardboard ≤ 13mm (1/2"); ...

48" X .375" X 40,000 LB. BRANER/DELTA CUT TO LENGTH LINE (USED)

• Manufacturer: Delta

Thickness Range: 0.090" - 0.375" (light gauge is approx.) Coil I.D.: 20" - 24" Stacker Length: 2' - 10' Line Speed: 0 - 160 FPM Consisting of the following: 30,000 Lbs. Capacity Model BGY-30 44" Bed Width 60" O.D...

ALPHA SR-8 CUT-OFF

Die Accelerator: Tallyrand: Includes Hydraulic Supply and Accelerator & Controls. Condition: As is.

72" X 40,000 LB. ROWE/HERR-VOSS CUT TO LENGTH LINE (USED)

• Manufacturer: Herr Voss

Line Includes: Reel Uncoiler (Rowe): 400,000 Series Model #40072-DSV Coil Buggy (Rowe): Coil Width Maximum: 72" Coil Weight Capacity Maximum: 40,000 Lbs. D. Maximum: 72" 9000 Series Model BGY-60-24 Threading Tabl...

1995 VIGANO 1500mm Cut-to-Length Line

• Manufacturer: VIGANO

PRE-SALE: THIS LINE IS IN PRODUCTION NOW BUT WILL BE DECOMMISSIONED IN 2025. BUYERS CAN INSPECT AND MAKE A PURCHASE AGREEMENT, THEN TAKE DELIVERY WHEN DECOMMISSIONED. PRICE HAS NOT BEEN FINALIZED, BUT IS LIKELY...

60" Slear 1 Iowa Precision Multi-Blank/Cut to Length Line

• Manufacturer: Iowa Precision
• Model: SLEAR 1

Year: 2004 Model #: SLEAR 1 Materials: CRS, Alum., Galv., Pre-paint Min./Max. Coil Width: 6- 60” Thickness Range: .015- .064” Max. Shear: 45,000PSI Max. Yield: 45,000PSI Max. Coil Weight: 20,000# Coil I.D...

72” x .250” x 50,000 Lbs. Braner Cut-To-Length Line

• Manufacturer: Braner

General Specifications: Manufacturer: Braner Width Capacity: 72" Weight Capacity: 50,000 Lbs. Gauge Range: .020" - .250" OD Range: 72" Max ID Range: 20-24" w/ Pads for 30" Stacker Sheet Length: 40' Max Li...