Used ctd machine

Trusted Seller
CTD Machine Double End Compound Miter Pneumatic Trim Saw 3HP 460V 3PH 16' Rail
- Manufacturer: CTD Machine
Miter Saw in good working condition. CTD Machine 2DC-02. Recently upgraded to 3Hp motors and added Powerflex VFD drive. 10" Blades. 16' Rail length, 36" work height. 28" Base depth. If this item ships as Flat Rat...
$4,250 USD
Millersburg, IN
Trusted Seller
Ctd Mitre Saw
- Manufacturer: CTD
1.5 Hp, 3500 Rpm Name: Ctd Mitre Saw | Arrival date: 08-08-2025 | Dimensions l x w x h (inches): 45 x 37 x 51 | Electrical: 3/60/230/460 | Weight (lb.): 585 | Available quantity: 1
$333 USD
Euclid, OH
Trusted Seller
CTD D22-30 DUAL MITER SAW
- Manufacturer: CTD
The CTD D22-30 is a double miter saw manufactured by CTD Machines, specializing in industrial saws. It is known for its ability to cut two 45° miters simultaneously, which is particularly beneficial for the decor...
$2,500 USD
Detroit, MI
Trusted Seller
CTD Machines
- Manufacturer: CTD Machines
12" Mitre cut-off saw This rugged, accurate heavy duty industrial indexing mitre cut-off saw uses our time tested 200 series sawhead. It will mitre up to 45 degrees each side of 0 degrees, with positive pin stop...
United States
CTD DM-200
- Manufacturer: CTD
Cutting Capacity with 12” Blade, 45 Degree Miter: 2-1/2” High x 5-3/8” Wide Equipment (2) Swivel Cutting Heads (2) Inside Vertical Clamps Tripped by Foot Valve Maintained Contact Safety Control Works with Down Fe...
$3,950 USD
Charlotte, NC
Trusted Seller
CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...
$1,080 USD
Millersburg, IN
Trusted Seller
CTD F426 Straight Cut-Off Saw 16" Blade 2700 RPM 5 Hp 3Ph Air Foot Control 90°
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. 90° cut only. Has backstop set at an angle. Blade and saw head can not turn. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cut...
$1,800 USD
Millersburg, IN
Trusted Seller
CTD F426 Straight Cut-Off Saw 16" Blade 3450 RPM 5 Hp 3Ph Air Foot Control 90°
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. 90° cut only. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cutting. Probably aluminum. 3450 RPM. 5Hp motor. 3Ph 230/460V. Man...
$1,800 USD
Millersburg, IN
Trusted Seller
CTD UCS222 #85533
- Manufacturer: CTD
SPECIFICATIONS: 2,800 RPM 25 strokes per minute EQUIPPED WITH: Straight cut off up cut saw Magnetic StarterTwo hand control for safety NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION OPTIONAL FEATURES: 6' Extended ...
Ames, IA
Trusted Seller
CTD UCS218 #84844
- Manufacturer: CTD
SPECIFICATIONS: 2,900 RPM 25 strokes per minute EQUIPPED WITH: Straight cut off up cut saw Magnetic StarterTwo hand control for safety NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION OPTIONAL FEATURES: 6' Extended ...
Ames, IA
Trusted Seller
CTD CDM60 #79162
- Manufacturer: CTD
OPTIONAL FEATURES: DELIVERY: 10-14 WEEKS Blade capacity: 16" OD (406mm); saw blades not included | Motor: 3 H.P., 3 Phase, 480 Volts | Cutting capacity: 90° Cutting: 4" (102mm) High x 10-1/2" (267mm) Wide; 45° Mi...
Ames, IA
Trusted Seller
CTD PF200M #83109
- Manufacturer: CTD
SPECIFICATIONS: NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA
Trusted Seller
CTD M225R #83111
- Manufacturer: CTD
SPECIFICATIONS: EQUIPPED WITH: COOLANT TANK NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA
Trusted Seller
CTD ABRASIVE COLD SAW #86559
- Manufacturer: CTD
NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA
Trusted Seller
CTD M225R #82079
- Manufacturer: CTD
SPECIFICATIONS: 90 DEGREE 2 1/2 in X 7 1/2 in EQUIPPED WITH: BALDOR INDUSTRIAL MOTOR - SN F0303212252 COOL MIST COOLANT SYSTEM GENERATOR CUTLER-HAMMER CONTROL SWITCH - 240 VOLTS - 30 AMPS - 60 HZ SPECIFICATIONS ...
Ames, IA