Used controllers in Czech Republic

CNC carousel Doosan PUMA V550, year 2014

• Manufacturer: Doosan
• Model: PUMA V550
• Spindle bore: 105 mm

CNC Carousel Doosan V550 Manufacturer: Doosan Type: PUMA V550 Year of manufacture: 2014 Control system: Fanuc Max. workpiece diameter 800 mm Chuck diameter on the machine: 450 mm Max. workpiece height: 750...

2007 Spinner PD-CNC

• Manufacturer: Spinner
• Model: PD-CNC

Control system: Siemens | Max. turning diameter: 120 mm | Maximum travel length in the x-axis: 400 mm | Maximum feedrate in the z axis: 400 mm | Maximum spindle speed: 8000 1/min | Length: 2500 mm | Width: 1400 ...

1992 ZPS SRU 40 CNC

• Manufacturer: ZPS

Accessories: 3 meter rod feeder Chuck and various interchangeable jaws Collet clamp and collets (different diameters) Holders 2 pcs driven tool direct 2 pcs driven angle tool

2021 KOVOSVIT MAS, a.s. MASTURN 550i CNC

• Manufacturer: MAS - Kovosvit
• Model: Masturn 550
• Spindle bore: 82 mm

Control system heidenhain: Manual Plus 620 | Turn table diameter: 500 mm | Turning lenght: 1500 mm | Sloping bed: NO | Spindle bore: 82 mm | Turret head: NO | Spindle speed: 0 - 3000 /min. | Number of tool posit...

Bluetooth CNC CXK-32BX

• Manufacturer: Bluetooth CNC

Maximum length of the turning: 150 mm | Max. turning diameter: 12 mm | Maximum rotary speed of the spindle: 3000 1/min

WEMAS CNC DZ 270 Pilot

• Manufacturer: Wemas

Equipment: Tool holders Maximum-turning length: 545 mm | Max. turning diameter: 300 mm | Maximum spindle speed: 5000 1/min

Lathe MAS S50i CNC

• Manufacturer: MAS - Kovosvit

Control system: Siemens New hard drive Renewed gearbox Swarf conveyor Turret head

Lathe FERMAT SF 40/1000 F CNC

• Manufacturer: Fermat

Siemens control system -max machining diameter over bed 400mm -max machining diameter over support 210mm -turning length 1000mm -hydraulic chuck with 38mm bore (we have a lot of jaws) -turret head 6 tools -...

Lathe Hwacheon Outex 160 B CNC

• Manufacturer: Hwacheon

The machine comes with a new chip conveyor Spindle bore 52 mm The machine has been little used

Lathe CNC DOOSAN PUMA TT 1800 SY + feeder

• Manufacturer: Doosan
• Model: PUMA TT1800SY
• Spindle bore: 105 mm

Upper driven head with Y axis, lower driven head,twin spindles. Max. swing above the bed 300mm. Max. swing above the support 230mm. Max. swing above bed with upper head 230mm. Max. swing above bed with lower...

Lathe FAT HACO TUR 560MN CNC

• Manufacturer: F.A.T.

turning length 4000mm year of manufacture 2012, little used, engine 27kw, system siemens sinumerik spindle passage 100mm turning diameter 650mm weight 6100kg with the lathe is a grinder, a 1000kg rotary cr...

NEW Lathe CNC SIEMENS 610/3100 with two chucks

• Manufacturer: Siemens

NEW CNC lathe - two chucks. Maximum working length 3100mm Maximum arc diameter 610mm The inner diameter of the chuck is 140mm Milling machine model ER25, can work axially and radially, with manual rotation of...

CNC lathe Doosan Puma Series TT1800SY yop 2006 control FANUC 18i - TB

• Manufacturer: Doosan
• Model: PUMA TT1800SY
• Spindle bore: 105 mm

Max. turning diameter 230 mm Maximum turning length 230 mm 2 pcs turret head (total 24 tool positions) Powered tools C-axis Y axis Probe Counterspindle Inventor of workpieces Inventor of chips Rod capacity 65 mm ...

DC 10/60

Duplo DC 10/60 - year: 2006 - 1. counter: 8,5M - year: 2006 - 2. counter: 10,4M - condition: good, functional - inspection possible Configuration: - 1x DC 10/60 - 10 stations - connecting bridge - vacuum feeding