Building Filters

FLUID agitated vessel type MD 15.69
- Manufacturer: FLUID
This FLUID agitated vessel type MD 15.69 The ELEKTRA electric-driven mixer is a high-quality process solution for the uniform mixing, emulsification, or homogenization of liquid and pasty media. The machine is de...
Grenzach-Wyhlen, Germany
Wölpper ZM-R/N155-FD-P1045 Vacuum reducer valve
- Manufacturer: Wölpper
The Wölpper ZM-R/N155-FD-P1045 is a high-quality Vacuum reducing valve for industrial applications, specifically suitable for regulating and stabilizing vacuum/low-pressure conditions in the process area. Thanks ...
Grenzach-Wyhlen, Germany
Eltex high voltage generator HVG30-5/H
- Manufacturer: Eltex Elektrostatik AG
- Horsepower: 0.20115331332657113 horsepower
- Power: 0.15 kilowatt
The Eltex HVG 30-5/H high-voltage generator is a robust industrial device for generating and regulating high DC voltages up to 30 kV. With an output power of up to 150 VA, this device is ideal for electrostatic a...
Grenzach-Wyhlen, Germany
Eltex high voltage generator HVG30-5/H
- Manufacturer: Eltex Elektrostatik AG
The Eltex HVG 30-5/H high-voltage generator is a robust industrial device for generating and regulating high DC voltages up to 30 kV. With an output power of up to 150 VA, this device is ideal for electrostatic a...
Grenzach-Wyhlen, Germany
WTB Binder GmbH 0705315040200
- Manufacturer: WTB Binder GmbH
The Binder climatic test chamber type 0705315040200 is ideal for temperature testing applications in laboratories or quality assurance. With a wide temperature range of -40°C to +150°C and a robust design, this d...
Lörrach, Germany
Omron P7SA-14F-ND 14-pin safety relay base module with 24V DC coil
- Manufacturer: Omron
The Omron P7SA-14F-ND is a 14-pole safety relay base module with 24V DC coil , designed for industrial safety applications. It is ideally suited for use in machine controls, emergency stop circuits and safety-ori...
Grenzach-Wyhlen, Germany- Trusted Seller

Guillotine, reel slitters for paper and plastics 1.500×1.250 mm 30 Ton
- Manufacturer: Germanplast
Guillotine, reel slitters for paper and plastics 30T Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton. No.1 pump 24 l/min, Volume 16 ccm Speed : up 53 mm/sec Speed down (80 Bar): 25 mm/se...
Issogne, Italy 
Digital display and interface module
The device shown is a digital display and interface modulePresumably intended for use in process automation (e.g., for pressure sensors or transmitters), this device allows configuration and calibration via exter...
Grenzach-Wyhlen, Germany
2003 Haug QTOC 180/90 WR-W
- Manufacturer: Haug
The Haug QTOC 180/90 WR-W is a high-quality, water-cooled and oil-free piston compressor that is ideal for industrial applications. With a maximum pressure output of 14 bar and one flow rate of 100 m³/h This comp...
Grenzach-Wyhlen, Germany
2003 Haug QTOC 180/90 WR-W
- Manufacturer: Haug
The Haug QTOC 180/90 WR-W is a high-quality, water-cooled and oil-free piston compressor that is ideal for industrial applications. With a maximum pressure output of 14 bar and one flow rate of 100 m³/h This comp...
Grenzach-Wyhlen, Germany
Mettler Toledo platform scale ID1plus-A with the DCC150ST load cell
- Manufacturer: Mettler - Toledo
- Model: ID1
The Mettler Toledo ID1plus-A platform scale with the DCC150ST load cell is a robust and precise solution for industrial applications. With a maximum capacity of 150 kg, this scale is ideally suited for use in goo...
Grenzach-Wyhlen, Germany
Cicero pressure vessel / docking / transport container for ciclesonide
- Manufacturer: Mycomed GmbH
This high-quality stainless steel docking and transport containers was originally used for the pharmaceutical active ingredient ciclesonide. The internally polished container with Tri-Clamp connections is ideal f...
Grenzach-Wyhlen, Germany- Trusted Seller

COSTARELLI AGGLOMERATOR D1500, 2000 kg/h
- Manufacturer: Costarelli
- Model: D-1500
For plastic scraps, in most cases without need to reduce size The offer includes: STORAGE HORIZONTAL BELT to grant non-stop feeding DIAGONAL LOADING BELT made in sturdy carbon steel with side walls, dragging ...
Issogne, Italy - Trusted Seller

2004 REICHERTER BFR 3
- Manufacturer: REICHERTER
- Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Measuring electronics HM-Control - Statistic function - Exit for PV printing - Table - Hydraulic unit Radial type for high volume parts ...
Contamine-sur-Arve, France - Trusted Seller

2024 ITALIAN 1.100 mm.75 kw water cooled
- Manufacturer: ITALIAN
GRANULATOR 1.100 mm. 75 kw for rigid and soft plastics Infeed mm 1.100x570 Rotor Ø mm 500 Rotor speed rpm 400 n.5 Rotating knives n.2 still knives Screen perforation, Ø 10 mm (or bespoke to project) 75 kW ...
Issogne, Italy
