Used controller in Switzerland

ROLLOMATIC CNC 600 X

• Manufacturer: Roll-o-Matic
• Grinding length: 150 millimeter

Control: FANUC 16i-M | Max. grinding length: 150 mm | Grinding diameter: 0.1 - 12.7 mm | Max. grinding wheel diamter: 150 mm | Taper in spindle: W15 | Crosswise: 230 mm | Longitudinal: 180 mm | Vertical: 150 mm ...

2005 STUDER S 33 CNC

• Manufacturer: Studer
• Model: S33

Control: GE FANUC Series 21i-TB | Centre height: 175 mm | Distance between centres: 1000 mm | Workpiece weight on centres max.: 120 kg | Diameter: 500 mm | Width: 2090 mm | Bore: 203 mm | Max. width: 80 mm | Rot...

ROLLOMATIC CNC 600 X

• Manufacturer: Roll-o-Matic
• Grinding length: 150 millimeter

Control: FANUC 16i-M | Max. grinding length: 150 mm | Grinding diameter: 0.1 - 12.7 mm | Max. grinding wheel diamter: 150 mm | Taper in spindle: W20 | Crosswise: 230 mm | Longitudinal: 180 mm | Vertical: 150 mm ...

SCHAUBLIN 125 CCN

• Manufacturer: Schaublin
• Model: 125CCN

FANUC 20T control Capacities Max. turning diameter Ø 270 mm CAMLOCK D1-3" spindle Spindle for B32 collets Cross slide Feed rates Tailstock Coolant 3-jaw chuck Ø 130 mm 11 Tool holders Set of B32 collets

Combination | 2006 Gildemeister CTX 420 Linear with tooling | Lots: 10, 109-116

• Manufacturer: Gildemeister
• Model: CTX 420

Combination | 2017 DMG Mori NTX 1000 with tooling | Lots: 1, 45-55

• Manufacturer: DMG Mori
• Model: NTX 1000

TORNOS BS 20 B

• Manufacturer: Tornos
• Model: BS20B

Number of spindles: 8 | Capacity round bar: 22.0 mm | Capacity square bar: 15 mm | Capacity hexagon bar: 19 mm | Max. advance of bar: 60 mm | Max. turning length: 60 mm | Number (steps): 20 | From: 625 t/min | U...

NC TURNING CENTER “SPINNER” TYPE TM

• Manufacturer: Spinner

7 axes, control Siemens Sinumerik 840D Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 l...

Combination | 2019 Spinner PD 42 S-V4 with tooling | Lots: 8, 97, 98

• Manufacturer: Spinner

2007 STUDER S 33 CNC

• Manufacturer: Studer
• Model: S33

Control: GE FANUC Series 21i-TB | Centre height: 175 mm | Distance between centres: 650 mm | Max. grinding diameter: mm | Workpiece weight on centres max.: 120 kg | Diameter: 500 mm | Width: 2090 mm | Bore: mm |...

PIBOMULTI TTEF "for CITIZEN M16"

• Manufacturer: Citizen
• Model: M16

For Citizen M16 Number of tool holders: 5 pce | Speeds up to: 3200 t/min | Weight: 15 kg

Combination | 2000 Schaublin 180 CCN with tooling | Lots: 11, 117-120

• Model: 180CCN

Combination | 2010 Struder S145 with tooling | Lots: 14, 130, 131

Combination | 2019 Hardinge T51 SP MSY ES LSC with tooling | Lots: 2, 56-63

WENDEL VDI 40

• Manufacturer: WENDEL

Tool holder: 39 pce | Tool holder fix (nbr.): 37 | Driven tool holder (nbr.): 2