Used controller in Zürich, Switzerland

2004 BTM 320 - 420A/CNC

• Manufacturer: BTM

Cut range round up to: 410 mm | Square: 410 mm | From: 10 m/min | Up to: 100 m/min | Table inclination right side: 60 ° | Roll diameter: 450 mm | Band length: 5300 mm | Band width: 34 mm | Sheet thickness: 1 mm ...

1991 HURTH ZK 200/1-TE CNC

• Manufacturer: Hurth
• Model: ZK

ideal for synchronizer rings, BWO Strg 785 H

IEMCA CNC BOSS 542 / 44

• Manufacturer: Iemca

Bar diameter round up: 5 mm | Up to: 44 mm | Length of bars max.: 3200 mm | Voltage 50 hz 3x: 400 Volt | Length: 4000 mm | Width: 600 mm | Height: 1600 mm

CNC Vertical Machining Centre DECKEL MAHO DMC 70 eVolution

• Manufacturer: Deckel / Maho
• Model: DMC 70 EVOLUTION

With Heidenhain iTNC 530 contouring control 7 With the following accessories: 2-axis NC swivel rotary table 700 mm x 500 mm clamping surface 2-fold pallet changer Vertical tool changer with 92 magazine slots...

CNC CYLINDRICAL GRINDER KELLENBERGER KEL-VARIA UR 175/1000

• Manufacturer: Kellenberger
• Model: Kel-Varia UR175/1000

Inventory no. 2240002, machine with : CNC-control Fanuc 18TB Grinding wheel equipment left Ø 500 x 80 mm., ref.1310.01 Grinding wheel equipment right Ø 400 x 63 mm., ref.1311.02 Turning part with automatic indexi...

Control AC2 HS 10bar PT1000 Neuter hor (4x)

Control AC2 HS 10bar PT1000 Neuter hor (4x)

1990 DONAU-KNAPP UZFM-V 300 H-CNC

• Manufacturer: Donau

CNC controlled rack milling machine, SIEMENS 810 M SIEMENS CNC control model M 810 for the partial axis ( X ), so that a quick quick changeover of the machine is possible without change gears. Dividing steps 0,00...

2000 GEIBEL & HOTZ FS 1050-GT-CNC-Rh

• Manufacturer: Geibel & Hotz
• Model: FS 1050 GT CNC
• Grinding length: 1,000 millimeter

SIEMENS CNC linear, ball screw table drive - The machine has with a simple and freely programmable SIEMENS CNC control type 840 D with complete operation under Windows, simple operator guidance textually and grap...

NC-DRILL CHUCK “EROGLU” TYPE ISO 30 A 1,0 – 13

for left and right rotation – shape A – 1,0 to 13

NC-DRILL CHUCK “EROGLU” TYPE ISO 30 A 0,5 – 8

for left and right rotation – shape A – 0,5 to 8

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 0,5 – 8

for left and right rotation – shape A – 0,5 to 8

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 1,0 – 13

for left and right rotation – shape A

BAND SAW “BIANCO” TYPE 30.30 A DV 90° CNC

• Manufacturer: BIANCO

automatic

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 3,0 – 16

for left and right rotation – shape A – 3,0 to 16