Used controller in Zürich, Switzerland

2002 STUDER(CH) eco 650 CNC

• Manufacturer: Studer

CNC line FANUC 21i-T, compact design, FANUC 3-axis CNC control type 21i-T with all necessary grinding, measuring and dressing cycles such as shoulder grinding, straight plunge grinding / longitudinal grinding, g...

1992 MIKRON(CH) A 35/36 CNC

• Manufacturer: MIKRON(CH)

Horizontal gear hobbing machine, BWO-CNC, Wst. loader - MIKRON - CNC control type 788- (BWO) with screen for total 8 axes (ABC u. WYZ u.WV) with dialog programming to create of different gear cycles such as helic...

3-axis CNC machining center HAAS VF-4

• Manufacturer: Haas
• Model: VF-4
• Spindle taper: BT 40

Travel paths (X/Y/Z): 1,200 x 400 x 400 mm, 26-way tool changer SK40, 1 chip conveyor

1998 Hurco BMC 30 HT/M CNC milling machine

• Model: BMC-30

Approx. total dimensions lxwxh: 2300 mm x 2200 mm x 2800 mm; T-slot fixture table size length: 1020 mm; T-slot fixture table size width: 400 mm; Travel x-axis: 762mm; Travel y-axis: 460 mm; Travel z-axis: 610 mm;...

1997 PROMAT(A) COMPACT S 5 NC

• Manufacturer: PROMAT(A)

Linear gantry for turned parts with workpiece blank and finished part deposit

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 3,0 – 16

for left and right rotation – shape A – 3,0 to 16

NC-DRILL CHUCK “EROGLU” TYPE ISO 30 A 1,0 – 13

for left and right rotation – shape A – 1,0 to 13

NC-DRILL CHUCK “EROGLU” TYPE ISO 30 A 0,5 – 8

for left and right rotation – shape A – 0,5 to 8

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 0,5 – 8

for left and right rotation – shape A – 0,5 to 8

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 1,0 – 13

for left and right rotation – shape A

2010 CNC vertical machining centre ‘DECKEL MAHO DMC 635 eco’

• Manufacturer: Deckel / Maho
• Model: DMC 635

With path control Siemens 810 Powerline With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain...

1987 HAUSER(CH) S 3 - CNC 314

• Manufacturer: Hauser
• Model: S3

CNC coordinate grinding machine with path control - CNC contouring control type CNC 314 (ELESTA POSELESTA II) with screen, for 4 axes (=XYC+ U-axis), with interpolation in 2 ½ dimensions (XYC). The U-axis is a fe...

1985 FEHLMANN(CH) PICOMAX 100-CNC 2

• Manufacturer: Fehlmann
• Model: Picomax 100

CNC controlled coordinate drilling machine with HDH-CNC 150 - HEIDENHAIN CNC - 2 axes path control type TNC 150 with color monitor, graphics, with all usual subroutines and cycles, threading cycles, manual contro...

1996 GEIBEL & HOTZ FS 635-Z CNC

• Manufacturer: Geibel & Hotz
• Grinding length: 600 millimeter

GEIBEL&HOTZ/SIEMENS 840 D CNC control, sine magnet