Used controller in Thuringia, Germany

1988 PSM H 150-1000

• Manufacturer: PSM

- Manual reel, bent - without own drive - manual Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: t | Inner coil diameter: mm | Total power re...

2021 John Deere 8R 410

• Manufacturer: John Deere
• Model: 8R 410
• Horsepower: 411 horsepower
• Hours: 2,466 hour

Hp (kw): 411 HP (302 kW) | Operating hours: 2466 Hours | Drive: Four-wheel drive | Hitch: Automatic | On-board computer: Yes | Compressed air brake system: Yes | Sprung front axle: Yes | Speed: 40 km/h | Air con...

2022 Kuhn Espro 6000R

• Manufacturer: Kuhn
• Model: ESPRO 6000
• Working width: 6 meter
• no. of rows: 4 rows

Operating hours: 150 Hours | Lighting: Yes | Working width: 6 m | Covering disc: Yes | Drive lane marking: Yes | Control unit to assure that wheel tracks are spared when sawing: Yes | Running gear: Yes | Rows: 4...

1990 MÜLLER PDE 75 SF HK

• Manufacturer: Muller

Equipment: - Hydraulic mold clamping, 4 x table - ram weight compensation, made by Festo - central lubrication - motorized ram adjustment - hydraulic clutch - Breaking plate - Clamping piece locking hydr. - foot ...

1987 STANKOIMPORT KD 2124K

• Manufacturer: Stankoimport

- Air coupling - Ross press safety valve - Balluff cam switch unit - Maintenance unit - automatic electric lubrication fluid grease - Accumulation tank for clutch - ram with breaking plate - prepared for ejector ...

2024 ZEULENRODA PED 63.4

• Manufacturer: Zeulenroda

The following work is to be carried out on the machine / Partial overhaul: - Machine is completely disassembled, checked - Machine is repainted - New press safety valve - New Vogel oil lubrication unit - New sepa...

1979 ZEULENRODA PYE 10 S1

• Manufacturer: Zeulenroda
• Model: PYE 10

Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 10 t | Discharge: 250 mm | Hub: 400 mm | Speed off: 100 mm / sec | Speed up: 450 mm / sec | Distance table - ram: 630...

Concealed shower control unit SLZA35 for RFID chips for paid showers

Concealed shower control unit SLZA35 for paid showers This concealed shower control is intended for connection to cold or premixed water. Due to the integrated RFID Jeton reader it is suitable for paid showers. T...

GSW-SCHWABE MHM 1,5/1250

• Manufacturer: Herman-Schwabe

- Manual spreading - motor-driven - pressure roller - new lacquering

1996 MÜLLER-WEINGARTEN ARP 80

• Manufacturer: Weingarten
• Model: ARP 80

Equipment: - with wheel drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload - ejector - central grease lubrication - Cover plate for through-feed hole - Infinitely va...

1995 DREHER 2370 B

• Manufacturer: Dreher

Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 300 mm | Coil weight: 1.5 tons | Inner coil diameter: 400 - 500 mm | Arm length: per arm 670 mm | Total power requ...

1968 IWK HEP 40

• Manufacturer: IWK

2 guide pillars 2 parallel grooves in ram and table, running transversely

2019 AMBOLD PEEV 40.2

• Manufacturer: AMBOLD

- pneumatic clutch (Ambold) - Separate clamping plate - Press safety valve - Two-hand control panel - Balluff cam switch unit - Foot switch - Switch cabinet with ABB safety control and touchscreen display

2007 SICMI KP 100

• Manufacturer: SICMI

Hydraulic workshop press The machine is of the Italian make SICMI, which was traded by the Knuth company.

1986 SMERAL LEN 40 C

• Manufacturer: Šmeral Brno
• Model: LEN 40 C

- Table clamping plate Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 40 t | Discharge: 265 mm | Hub: 8 - 95 mm | Table dimensions: 660 x 520 mm | Pestle dimensions:...