Building Filters
- Trusted Seller
2014 DMG MORI NLX 2500/700 SY
- Manufacturer: DMG Mori
- Model: NLX 2500
- Spindle bore: 91 millimeter
The machine is in very good technical condition and can be tested. B-axis: 734mm
Brno, Czech Republic - Trusted Seller
CNC lathe DMG CTX 510 Ecoline
- Manufacturer: DMG Mori
- Model: CTX 510 ECOLINE
- Siemens 810D - maximum turning diameter: 465 mm - maximum passage diameter: 680 mm - maximum passage diameter over cross slide: 465 mm maximum cross section width - X/Z axis travel: 300/1050 mm - 315 mm 3-...
Prague, Czech Republic - Trusted Seller
2022 Doosan LYNX 2100 LSYB
- Manufacturer: Doosan
- Model: LYNX 2100
- Spindle bore: 65 millimeter
Turning lenght: 510 mm | Turn table diameter: 300 mm | Sloping bed: YES | Turret head: YES | Spindle bore: 65 mm | Swing over bed: 600 mm | Travel x-axis: 205 mm | Travel y-axis: 105 mm | Travel z-axis: 560 mm |...
Brno, Czech Republic - Trusted Seller
Lathe Tornos NAT-125 VARIO
- Manufacturer: Tornos
13mm diameter. Sliding headstock, five transverse supports for grooving and longitudinal turning, additional three-spindle drilling and threading device, additional two-spindle drilling device on the parting side...
Prague, Czech Republic - Trusted Seller
2008 Citizen Cincom L 32
- Manufacturer: Citizen
- Model: Cincom L32
- Spindle bore: 12 millimeter
The machine is in good technical condition, under power, after agreement is possible to test it. Without chip conveyor.
Brno, Czech Republic - Trusted Seller
2022 Haas Automation ST-30 Y
- Manufacturer: Haas
- Model: ST-30Y
- Spindle bore: 88.9 millimeter
The machine is in good technical condition, under power, after agreement is possible to test it. Worked 500 hours.
Brno, Czech Republic - Trusted Seller
TOS Hulín SKIQ 8 CNC
- Manufacturer: Toshulin
- Model: SKIQ 8
The machine is not possible to test it. It is dismantled and stored in warehouse.
Brno, Czech Republic - Trusted Seller
Tornos-Bechler Deco 2000 I CNC Lathe
- Manufacturer: Bechler
We hereby offer this used Tornos-Bechler Deco 2000 CNC lathe, located in the Czech Republic. This machine is equipped with a Fanuc PNC-Deco control unit, providing advanced programming capabilities and intuitive ...
- Trusted Seller
1998 Gildemeister CTX 400
- Manufacturer: Gildemeister
- Model: CTX 400
- Spindle bore: 65 millimeter
The machine is fine, it can be retested. Turn table diameter: 420 mm | Turning lenght: 600 mm | Sloping bed: YES | Y axis: NO | Counterspindle: NO | Spindle bore: 65 mm | Milling head: NO | Driven tools: YES | Nu...
Brno, Czech Republic - Trusted Seller
2000 Pinacho Taurus 260
- Manufacturer: Pinacho
- Model: Taurus 260
This Pinacho Taurus 260 was manufactured in 2000. A robust horizontal turning machine, it features a maximum turning length of 1500 mm and a diameter of 520 mm. Equipped with a spindle speed of up to 2500 1/min a...
Czechia - Trusted Seller
2017 TOS Hulín SKIQ 8 CNC
- Manufacturer: Toshulin
- Model: SKIQ 8
The machine is in very good technical condition, under power, after agreement is possible to test it.
Brno, Czech Republic - Trusted Seller
Hyundai HIT-250 MS I CNC Lathe I 2004
- Manufacturer: Hyundai
- Model: HIT 250 MS
- Spindle bore: 80 millimeter
Explore offering this pre-owned Hyundai HIT-250 MS CNC Lathe, manufactured in 2004 and currently located in Czech Republic. This CNC lathe is equipped with a Siemens Sinumerik 840D control unit, providing precise...
Czechia - Trusted Seller
Nakamura-Tome WT 250 MMY I CNC Lathe I 2004
- Manufacturer: Nakamura
- Model: WT 250 MMY
- Spindle bore: 65 millimeter
We hereby offer this used Nakamura-Tome WT 250 MMY CNC lathe from 2004, located in the Czech Republic. Known for its reliability and precision, this machine is equipped with the advanced Fanuc 18i-T control unit,...
- Trusted Seller
MAS Masturn MT 50 I CNC Lathe I 2005
- Manufacturer: MAS - Kovosvit
- Model: Masturn 50
- Spindle bore: 82 millimeter
We hereby offer this used MAS Masturn MT 50 CNC lathe from 2005, located in the Czech Republic. Equipped with a Siemens Sinumerik 810D control unit, this lathe offers user-friendly operation and high accuracy. It...
- Trusted Seller
Chevalier FCL-2140 I CNC Lathe
- Manufacturer: Chevalier
- Model: FCL-2140
- Spindle bore: 85 millimeter
We hereby offer this used Chevalier FCL-2140 CNC lathe, located in the Czech Republic. Featuring the Fagor 8055 M control unit, it offers intuitive operation and advanced programming capabilities for seamless pro...
Star KNC-32 CNC Lathe
- Manufacturer: Star
- Model: KNC-32
Good condition Star KNC-32 CNC Lathes manufactured in 1989. Located in USA and other countries. Click request price for more information.
USA