Used controller in Cadro, 6965 Lugano, Switzerland

1998 OKUMA LB 25 II-M

• Manufacturer: Okuma
• Model: LB25

Type: CNC LATHE | Condition: Used | Status: Good | Control type: Okuma OSP 5020L | Distance between centers: 1,250 mm | X axis travel: 230 mm | Z axis travel: 670 mm | Max piece vaulting: Ø 550 mm | Max diameter...

GRAZIANO SAG 24 CNC LATHE - 450x2000

• Manufacturer: Graziano
• Model: SAG 24 CNC

Retrofitted in 1997. Complete with: - n. 1 four jaws table Ø 800 mm. - n. 1 three jaws hydraulic self centering chuck Ø 360 mm. - n. 1 automatic square turret - n. 1 x 12 positions turret - tool-holders - ...

TOOL TEMP TT181

• Manufacturer: Tool Temp
• Model: TT-181

CT1570304 TT181 TEMP TOOL TEMPERATURE CONTROL UNIT USED

TOOL TEMP TT181

• Model: TT-181

CT1570348 TT181 TEMP TOOL TEMPERATURE CONTROL UNIT USED

2002 OKUMA 2 SP V80

• Manufacturer: Okuma
• Model: 2SP-V80

Type: 2-SPINDLE VERTICAL LATHE | Condition : Used | Status: Good | Control type: OH-OSP-LGU | Max. swing: Ø 1,000 mm | Max turning diameter : Ø 800 mm | Max. turning length: 840 mm | X axis travel: 465 mm | Z a...

2000 DAEWOO PUMA 300 M

• Manufacturer: Daewoo
• Model: Puma 300

YEAR OF FIRST INSTALLATION: 2000 MAX DIAM. ROTATING ON THE BENCH: 590 mm MAX TURNING DIAM.: 355 mm MAX TURNING LENGTH: 600 mm X-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 680 mm NOSE MANDREL ATTACHMENT: ASA 8 SPIN...

AVM ANGELINI JOLLY 2-AXIS FANUC CNC LATHE

• Manufacturer: Fanuc

Numerical control FANUC OT/C Distance between centers mm 800 Height between centers mm 165 Max. turning diameter on the bench mm 330 Max. turning diameter on the cross carriage mm 160 Spindle hole mm 38 Spindle s...

2006 EMAG VL 5 Ref No: 54955

• Manufacturer: Emag
• Model: VL 5

Object: 54955 | Controls: FANUC | Number of spindles: 1 | Number of turrets: 1 | Spindle revolutions (max): 6000 /min | Total power consumption: 36 kW | Mains voltage: 400 V | Mains frequency: 50 Hz | Space ...

BENELLI MOD. TF 200 2-AXIS CNC LATHE

• Manufacturer: Benelli

GENERAL DATA: NUMERICAL CONTROL OSAI 8601 T WORKING AREA: -MAX ROTATING DIAMETER ON THE BED MM.480 -MAX ROTATING DIAMETER ON THE CARRIAGE MM.400 -MAX TURNING DIAMETER (WITH MILLED DISC) MM.260 -TURNING LENGTH BE...

COLOMBO FRONTAL CNC LATHE

• Manufacturer: Colombo

COLOMBO New02678 FAGOR 8020 NUMERICAL CONTROL PLATEAU DIAMETER 1200 MM TURNING PASSAGE MM.1500 TURNING LENGTH MM 1200 COMPLETE WITH ACCESSORIES: AUTOMATIC TURRET NR.04 TOOLS USED MACHINE

2004 OMAG MILL 5

• Manufacturer: Omag
• Model: Mill 5

Request information Ø angular disk head: mm 350 / 600 | X axis cross travel: mm 4.500 | Y axis longitudinal travel: mm 3.500 | Vertical axis z travel: mm 1.200 | Tool connection: ISO 50 | Spindle power: kw 15 | C...

LYMCO BML-510 CNC LATHE

LYMCO 09719 FANUC Oi-TC numerical control Turning length 1578 mm Turning diameter 510 mm Bar passage 90 mm Spindle nose ASA A2-8 Spindle speed 2500 rpm X-axis travel 290 mm Z-axis travel 1590 mm Tailstock quill d...

2013 HWACHEON HI-ECO 450A YMC

• Manufacturer: Hwacheon
• Model: Hi-Eco
• Spindle bore: 90 millimeter

Type: CNC LATHE | Condition: Used | Status: Good | Control type: Fanuc 0i-TD | X axis travel: 280 mm | Y axis travel: ± 60 mm | Z axis travel: 790 mm | Swing over bed: Ø 700 mm | Swing over saddle: Ø 550 mm | Wo...