Used controller in Thuringia, Germany

1968 IWK HEP 40

• Manufacturer: IWK

2 guide pillars 2 parallel grooves in ram and table, running transversely

2019 AMBOLD PEEV 40.2

• Manufacturer: AMBOLD
• Power requirement: 3.5 kilowatt

- pneumatic clutch (Ambold) - Separate clamping plate - Press safety valve - Two-hand control panel - Balluff cam switch unit - Foot switch - Switch cabinet with ABB safety control and touchscreen display

2007 EBU H 125 FRIV

• Manufacturer: EBU
• Model: H125

– with hydraulically actuated multi-disc wet clutch and spring-applied safety brake – hydraulic overload protection – hydraulic connecting rod clamping – motorized ram height adjustment – semi-automatic stroke a...

1995 DREHER 2370 B

• Manufacturer: Dreher

Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 300 mm | Coil weight: 1,5 t | Inner coil diameter: 400 - 500 mm | Arm length: per arm 670 mm | Total power require...

Concealed shower control unit SLZA35 for RFID chips for paid showers

Concealed shower control unit SLZA35 for paid showers This concealed shower control is intended for connection to cold or premixed water. Due to the integrated RFID Jeton reader it is suitable for paid showers. T...

1983 SMERAL LEN 63 C

• Manufacturer: Šmeral Brno
• Model: LEN 63 C

- Table clamping plate Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 63 t | Discharge: 315 mm | Hub: 10 - 105 mm | Strokes: 71 - 140 stroke/min | Ram adjustment: 70...

1983 SMERAL LEN 25 C

• Manufacturer: Šmeral Brno
• Model: LEN 25 C

- Table clamping plate Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 25 t | Discharge: 225 mm | Hub: 8 - 85 mm | Table dimensions: 560 x 450 mm | Pestle dimensions:...

2007 SICMI KP 100

• Manufacturer: SICMI
• Power requirement: 2.2 kilowatt

Hydraulic workshop press The machine is of the Italian make SICMI, which was traded by the Knuth company.

1986 SMERAL LEN 40 C

• Manufacturer: Šmeral Brno
• Model: LEN 40 C

- Table clamping plate Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 40 t | Discharge: 265 mm | Hub: 8 - 95 mm | Table dimensions: 660 x 520 mm | Pestle dimensions:...

1998 RUHRMANN EVR 80 H

• Manufacturer: RUHRMANN

Equipment - final drive - Hydraulic clutch - Large ram - pneumatic ram weight compensation with air reservoir on the right-hand side of the upright - oil lubrication, made by Vogel - Semi-automatic lift adjustmen...

1991 MÜLLER EXP 60 SF/HK

• Manufacturer: Muller
• Model: EXP 60 SFHK
• Power requirement: 4 kilowatt

- Fixed table - clamping plate - Ortlinghaus hydraulic clutch with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely t...

2007 EBU HK 200 FR

• Manufacturer: EBU
• Model: HK 200 FR

– Hydraulic clutch – Fixed table – Hydraulic overload protection in the ram – Hydraulic connecting rod clamp – Motorized ram height adjustment 120 mm with digital display of the set ram height, rapid and creep sp...

1988 MABU 15 TFK

• Manufacturer: Mabu
• Power requirement: 1.1 kilowatt

- friction-locked Ortlinghaus clutch - but not for manual insertion work - Press was tested in our company and delivered with current UVV

1995 MÜLLER EXP 100 SFHK

• Manufacturer: Muller
• Power requirement: 5.5 kilowatt

- Fixed table - Breaking plate - Hand lever grease lubrication - Ratchet for ram adjustment - CE

1986 ZEULENRODA PYE 160 S1M

• Manufacturer: Zeulenroda
• Model: PYE 160
• Power requirement: 17 kilowatt

Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 160 t | Discharge: 360 mm | Hub: 500 mm | Speed off: 200 mm/sec | Speed up: 125 mm/sec | Distance table - ram: 1000 m...