Search By Category

Search By Manufacturer

Search By Canton

Building Filters

2038

Used controller in Switzerland

  • Trusted Seller
    2005 CHIRON MILL 2000 HIGH

    2005 CHIRON MILL 2000 HIGH SPEED Ref No: 50115

    • Manufacturer: Chiron
    • Model: MILL 2000

    including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2000 DMG DMU 50 EVOLUTION

    2000 DMG DMU 50 EVOLUTION Ref No: 48185

    • Manufacturer: DMG Mori
    • Model: DMU 50

    Total spindle hours: 38800 hours. machine in production until April 2025 Control system overhauled in 2024

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2000 BROTHER TC-31 A

    2000 BROTHER TC-31 A

    • Manufacturer: Brother
    • Model: TC-31A

    Control: CNC – A00 | Number of axis total: 3 | Number of spindles: 1 | Number of tables: 2 | Table length: 500 mm | Table width: 270 mm | Table load max.: 80 kg | Longitudinal travel (x-axis): 350 mm | Transvers...

    Brügg, Switzerland
  • Trusted Seller
    2000 SODICK AM3L

    2000 SODICK AM3L

    • Manufacturer: Sodick
    • Model: AM3L

    Control: SODICK LN1 | Number of axis total: 3 | Length: 1260 mm | Width: 1250 mm | Table load max.: 550 kg | Longitudinal traverse (x-axis): 300 mm | Cross traverse (y-axis): 200 mm | Height adjustment (z-axis):...

    Brügg, Switzerland
  • Trusted Seller
    DIXI 100 / CHO 2x48

    DIXI 100 / CHO 2x48 - CHP 9

    • Manufacturer: Dixi

    Control: GE FANUC 15-MB / 4 axis | Number of axis total: 4 | Length: 320 mm | Width: 320 mm | Number of tools: 2 48 = 96 | Spindle nose iso: 40 | Up to: 12000 t/min | Voltage 50 hz 3x: 380 Volt | Tool adjustment...

    Brügg, Switzerland
  • Trusted Seller
    FEINTOOL GKP 160 Ref No:

    FEINTOOL GKP 160 Ref No: 38887

    • Manufacturer: FEINTOOL

    Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    FEINTOOL GKP 250 Ref No:

    FEINTOOL GKP 250 Ref No: 38885

    • Manufacturer: FEINTOOL

    Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2000 HAMMERLE BM 200 -

    2000 HAMMERLE BM 200 - 3100

    • Manufacturer: HAMMERLE

    This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Cont...

    Switzerland
  • Trusted Seller
    2002 FPT DINO

    2002 FPT DINO

    • Manufacturer: FPT
    • Model: DINO

    Control: HEIDENHAIN 530 | Number of axis total: 5 | X axis: 2800 mm | Y axis: 800 mm | Z axis: 1600 mm | Taper in spindle: HSK 63 | From: 0 t/min | Up to: 18000 t/min | Voltage 50 hz 3x: 380 Volt | Total install...

    Brügg, Switzerland
  • Trusted Seller
    2009 MÄGERLE MGC 210.50.45 Ref

    2009 MÄGERLE MGC 210.50.45 Ref No: 55904

    • Manufacturer: Mägerle

    Machine in excellent condition, serviced annually by the manufacturer - Box-type construction with heavy ribbing - Hydrostatic X and Y guideways (vibration damping for superior surface finish) - Swivel table - Ma...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2007 MÄGERLE MFP-125.65.65 Ref No:

    2007 MÄGERLE MFP-125.65.65 Ref No: 55905

    • Manufacturer: Mägerle
    • Grinding length: 1,250 millimeter

    Machine in excellent condition (serviced annually by the manufacturer) - X,Y axes hydrostatically preloaded - Knoll vacuum filter VL 1500/10000 - Max. spindle speed 50 m/s - Grinding wheel flanges: 5 pcs. - Clamp...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 FEINTOOL MFA 1600 Ref

    2003 FEINTOOL MFA 1600 Ref No: 42972

    • Manufacturer: FEINTOOL

    !! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ba...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2007 FEHLMANN PICOMAX 54 Ref

    2007 FEHLMANN PICOMAX 54 Ref No: 54944

    • Manufacturer: Fehlmann
    • Model: Picomax 54

    Equipment: - 20 tool holders, - complete documentation

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 ARKU RM 50X/9 ECOPLAN

    2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

    • Manufacturer: Arku

    Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    Deckel Maho DMU 50 Evolution

    Deckel Maho DMU 50 Evolution I Vertical Machining Center

    • Manufacturer: Deckel / Maho
    • Model: DMU 50 EVOLUTION
    • Spindle taper: SK 40

    We hereby offer this used Deckel Maho DMU 50 Evolution vertical machining center from 2005, located in Switzerland. Equipped with the advanced Heidenhain TNC 430 control unit, it ensures precise and efficient ope...

    $79,708 USD

    Get financing

    Est. $1,500/mo

    Switzerland
  • no-image_en.png

    Pinacho ST180 CNC Lathe

    • Manufacturer: Pinacho
    • Model: ST180

    Good condition Pinacho ST180 CNC Lathes manufactured in 2015. Located in Switzerland and other countries. Click request price for more information.

    Switzerland
3536373839