Used controller in Neuchâtel, Switzerland

NC-DRILL CHUCK “EROGLU” TYPE ISO 30 A 1,0 – 13

for left and right rotation – shape A – 1,0 to 13

NC-DRILL CHUCK “EROGLU” TYPE ISO 30 A 0,5 – 8

for left and right rotation – shape A – 0,5 to 8

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 0,5 – 8

for left and right rotation – shape A – 0,5 to 8

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 1,0 – 13

for left and right rotation – shape A

BAND SAW “BIANCO” TYPE 30.30 A DV 90° CNC

• Manufacturer: BIANCO

automatic

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 A 3,0 – 16

for left and right rotation – shape A – 3,0 to 16

2002 TRENNJAEGER TEBA240CF-NC

• Manufacturer: Trennjaeger

Cut range round up to: 240 mm | Square: 240 mm | Flat: 240 mm | From: 30 m/min | Up to: 90 m/min | Roll diameter: 300 mm | Band length: 2170 mm | Band width: 27 mm | Sheet thickness: 1 mm | Voltage 50 hz 3x: 400...

mixing-weighing-system-plc-controlled-from-extruder-to-bag-new

• Manufacturer: Germanplast

PLC CONTROLLED MIXING, BAG FILLING AND WEIGHING SYSTEM for plastic granule customized to the project including [vertical mixers](https://www.germanplast.eu/it/annunci/4309783-vertical-mixers-from-5-to-30-m3), ...

Combination | 2005 Victor Vcenter-102A CNC milling center with tooling | Lots: 1, 176-187

• Model: Vcenter-102

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 AD/B 0,5 – 8

for left and right rotation – shape AD/B – 0,5 to 8

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 AD/B 1,0 – 13

for left and right rotation – shape AD/B – 1,0 to 13

NC-DRILL CHUCK “EROGLU” TYPE ISO 40 AD/B 3,0 – 16

for left and right rotation – shape AD/B – 3,0 to 16