Building Filters
- Trusted Seller

Hermle UWF 1001F
- Manufacturer: Hermle
Cnc mark: Heidenhain | Cnc type: TNC 415 | Table length: 1.000 mm | Table width: 490 mm | X: 700 mm | Y: 550 mm | Z: 500 mm | Spindle recording: SK40 | Rpm: 25 - 3,150 RPM | Power: 12 kW | Drill pinole: 100 mm |...
Etten-Leur, Netherlands - Trusted Seller

1998 Hermle C800U
- Manufacturer: Hermle
- Model: C 800
This Hermle C800 U has been taken out of production in working order and can also be viewed in working order at our location. Supplied as standard incl. machine feet, LANG clamping table for centre clamps, docum...
$32,659 USDSchijndel, Netherlands 
Hydraulic press | Workshop press | Sicmi PSS NC ( 20 - 150 TON)
- Manufacturer: Sicmi
- Stroke length: 350 millimeter
Hydraulic workshop press suitable for various operations such as straightening sheet metal, assembling and disassembling bearings, shafts, rings etc. The press frame is made of fully welded milled steel. The pres...
$9,739 USDStaphorst, Netherlands- Trusted Seller

2007 Matchmaker MiniMill 610
- Manufacturer: Matchmaker
- Spindle taper: BT 40
This machine is in excellent condition and runs smoothly (check video's!). This machine has always been kept clean and is well maintained. IT IS POSSIBLE TO INSPECT THE MACHINE UNDER POWER! For an appointment ...
Zutphen, Netherlands - Trusted Seller
Wotan Rapid C
- Manufacturer: Wotan
- Model: RAPID C
This machine was completely overhauled in 2004 by Dories Scharmann. In top condition
Etten-Leur, Netherlands - Trusted Seller

2007 Doosan Mynx 650
- Manufacturer: Doosan
- Model: MYNX 650
- Spindle taper: BT 40
2007 Doosan Mynx 650 IT IS POSSIBLE TO INSPECT THE MACHINE UNDER POWER! For an appointment or more information please contact us at: +31 652 685528 or info@hanemach.nl Control: Fanuc Series 21i-MB Cutting tim...
Deventer, Netherlands - Trusted Seller

Deckel Maho DMU 50T
- Manufacturer: Deckel / Maho
- Model: DMU 50 T
This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is still in very neat condition and both the axles and the spindle still turn very...
$11,081 USDSchijndel, Netherlands - Trusted Seller

2000 Deckel Maho DMU 50 eVolution
- Manufacturer: Deckel / Maho
- Model: DMU 50 EVOLUTION
The 5-axis DMU50 eVolution has been taken out of production and can be seen working in our showroom (by appointment). The machine is equipped with 40 bar internal cooling through the spindle, chip conveyor, 60-f...
$27,410 USDSchijndel, Netherlands - Trusted Seller

2004 First MCV 300
- Manufacturer: First
The machine was taken over from the customer in working condition and can also be viewed in working condition at our premises. Both the spindle and the axles run very smoothly Additional information: Max. work...
$12,830 USDSchijndel, Netherlands 
2008 Mitutoyo Vision Accel 1010 Pro 1 CNC Measuring System
- Manufacturer: Mitutoyo
Mitutoyo Vision Accel 1010 Pro 1 Measuring System Year 2008 X1000 Y1000 Z130 E1x/y/z=1,5Um 4L/1000 Weight 3000 kg Dimensions approx Width – Depth 1912 X 2086 cm
Gendt, Netherlands- Trusted Seller

2008 Hermle C30V
- Manufacturer: Hermle
This machine has been used exclusively for copper processing. The cooling water supply is present but unused. It's a magnificent machine that has always produced very light metal cuts, has never used cooling wate...
$64,151 USDSchijndel, Netherlands - Trusted Seller

Deckel FP2NC
- Manufacturer: Deckel / Maho
- Model: FP 2
Control brand/type: DIALOG 11 | X-axis stroke: 300 | Y-axis stroke: 300 | Z-axis stroke: 400 | Max. spindle speed: 5000 | Spindle motor power: 12 | Spindle mount: ISO40 | Table dimensions (lxw): 620 x 390 mm | M...
$5,832 USDSchijndel, Netherlands - Trusted Seller

2008 Hermle C30V
- Manufacturer: Hermle
This HERMLE C30V is practically new, with only 4329 spindle hours! The machine is in excellent condition and can be viewed at our location, even powered up! This machine is equipped as standard with; - Heidenha...
$64,151 USDSchijndel, Netherlands - Trusted Seller

2008 Hermle C40V
- Manufacturer: Hermle
- Model: C40V
Once again a very neat HERMLE C40V from a mold making facility. The machine is in super neat condition and can also be viewed at our location under power! This machine is equipped as standard with; - Blum Tool...
$64,151 USDSchijndel, Netherlands - Trusted Seller

2012 Leadwell V-20i
- Manufacturer: Leadwell
- Model: V20I
- Spindle taper: BT 40
2012 Leadwell V20i IT IS POSSIBLE TO INSPECT THE MACHINE UNDER POWER! For an appointment or more information please contact us at: +31 652 685528 or info@hanemach.nl Control: Fanuc 0i-MD cutting time: 4804 ho...
Deventer, Netherlands 
Weiler E110 CNC Lathe
- Manufacturer: Weiler
- Model: E110
Good condition Weiler E110 CNC Lathes manufactured in 2004. Located in Netherlands and other countries. Click request price for more information.
Netherlands
