Used controller in Lugano, Switzerland

GILDEMEISTER NEF 710×3000 Cnc lathe with flat bed

• Manufacturer: Gildemeister
• Model: NEF 710

Used GILDEMEISTER NEF 710×3000 flat bed cnc lathe Used GILDEMEISTER NEF 710×3000 flat-bed cnc lathe is a sturdy medium-large CNC lathe with parallel bed, equipped with ECS 2401 cnc; complete with quick-change man...

SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe

• Manufacturer: Spinner

Used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe The used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe is a robust CNC tilting bed lathe with ASA 8″ size flat guideways, with BARU...

INDEX GB 65 cnc lathe

Year of production: Length: Width: Min/Max height: Weight: Loader Serial Number:

Multi-spindle lathe TORNOS SAS 16 DC

• Manufacturer: Tornos
• Model: SAS16DC

Multi-spindle automatic lathe Bar diameter: Maximum feed length: 63 mm Maximum length of turned part: 52 mm Number of spindle speeds: 16 Spindle speed (settable by PLC): 1200-8000 rpm Maximum radial slide travel:...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

Multi-spindle automatic lathe No. 6 spindles Max bar passage: Max feed length: 75 mm. Spindle: Production cycle range: pieces per minute: 4.9 to 72 - seconds per piece: 12.2 to 0.84. No. 6 transverse units Fixed ...

1998 CAMI TACN cnc lathe

Automatic cnc lathe Maximum bar passage: Max thread diameters with taps and dies: Max length of a feed: Spindle: Turret: Drive: Flanged motor power 4 kw, rotational speed 1450 rpm. Various accessories.

Tornos Deco 13bi

• Manufacturer: Tornos
• Model: Deco 13

Caratteristiche MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. part length : 160 [mm] - Spindle speeds : 100 - 12 000 [rpm] - Spindle power : 3,7 [kW] - Positionned stop and indexing : 0,1 [°] - Number ...

Uniteam Covertek

• Manufacturer: Uniteam

The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 s...

HARDINGE CONQUEST T42L motorized 3-axis cnc lathe

• Manufacturer: Hardinge
• Model: Conquest T42

Used HARDINGE CONQUEST T42L motorized 3-axis cnc lathe The used HARDINGE CONQUEST T42L motorized 3-axis cnc lathe is a rugged and precise CNC lathe with an inclined bed of medium size, turning length about 700mm,...

MORANDO VS 14 H CNC VERTICAL BORER

• Manufacturer: Morando
• Model: VS14

Retrofitted in 2014. Complete with: - hydraulic self centering chuck Ø 1.450 mm. - n. 1 vertical tool with square turret - chipconveyor - tool-holders - full covered

1995 BIGLIA B500 S cnc lathe

• Manufacturer: Biglia
• Model: B 500

Double spindle Turning Diameter: 250 mm Turning Length: 500 mm Bar Passage: 70 mm X-axis stroke: 220 mm Z Axis Travel: 500 mm Self-centering diameter: 210 - 250 mm Devices and Accessories: Spindle Nose ASA 6 - CN...

Turning tool holder cod. Db DBD 164N1

From 25 x 25mm Double bevel Length: Width: Min/Max Height: Weight:

1999 GILDEMEISTER GM20-6 AC Lathe

• Manufacturer: Gildemeister
• Model: GM 20

Multi-spindle automatic lathe No. 6 spindles No. 6 side slides (of which No. 4 are cross slides) No. 6 slides with tool holders Max bar diameter: Round 20 mm (25 oversize) - Hexagonal 17 mm (21 spec) - Square 14 ...

2003 GILDEMEISTER GM20-6 AC lathe

• Manufacturer: Gildemeister
• Model: GM 20

Multi-spindle automatic lathe No. 6 spindles No. 6 side slides (of which No. 4 are cross slides) No. 6 tool slides Max bar diameter: Round 20 mm (25 oversize) - Hexagonal 17 mm (21 spec.) - Square 14 mm (17 spec....

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Round: 14 mm - Square: 10 mm - Hexagonal: 12 mm Max feed length: 75 mm. Spindle: Number of speeds: 16 - Spindle revolutions: 900-6000 rpm. - Production cycles: no. 22 Production c...