Used controller in Lugano, Switzerland

MORI SEIKI SL 2500 Y-axis motorized CNC lathe

• Manufacturer: Mori Seiki

Used MORI SEIKI SL 2500 Y Y-axis motorized CNC lathe The used MORI SEIKI SL 2500 Y Y-axis motorized CNC lathe is a fast, medium-sized, tilt-bed CNC lathe equipped with a tailstock, a C-axis electric spindle, and ...

BERTHIEZ TFM 200 N CNC VERTICAL BORER

• Manufacturer: Berthiez

Complete with: - 12 seats ATC - toolholders Table ø: 2.050 mm. | Max. working ø: 2.300 mm. | Spindle power: 40 Kw. | Max. working height: 2.500 mm. | Max. weight on table: 20 Tons. | Table speeds: 1,6 ÷ 200 Rpm. ...

BUSCH SO CNC BED TYPE THREAD MILLING MACHINE

• Manufacturer: Busch

Complete with: - cnc dividing head Ø 310 mm., hole Ø 165 mm., with self centering chuck, tailstock and steady

MORI SEIKI NL2500SY motorized lathe set

• Manufacturer: Mori Seiki
• Model: NL-2500SY

Cnc Bed Type Milling Machine TIGER TFA 4

• Manufacturer: Tiger
• Model: TFA 4

Cnc Bed Type Milling Machine TIGER mod. TFA4, Cnc HEIDENHAIN 355, used machine in excellent conditions, available for immediate delivery Subject to Prior Sale.

NIKKEN CNC 250 Turntable

• Manufacturer: Nikken

Table Type Cnc Horizontal Boring Machine SAN ROCCO MEC 3

• Manufacturer: San Rocco
• Model: Mec 3
• Spindle bore: 75 millimeter

Table Type Cnc Horizontal boring Machine SAN ROCCO MEC 3, spindle diameter 75 mm, ISO 40 taper, rotary table 1,220 x 920 mm, strokes 1,200 x 1,500 x 1,100 mm, with ICEM 402 CNC available n our stock for prompt de...

2001 ECOCA EL 4610-E

• Manufacturer: Ecoca

code 1017 Indramotion MTC micron numerical control (installed 2021) Rotation diameter over the bench 460 mm Swing diameter above the carriage 258 mm Rotation diameter under head 670 mm Point height 225 mm C...

2011 Wasino - Amada J01

• Manufacturer: Wasino
• Model: J-1

Lathe WASINO AMADA J1 with parts stocker and gantry loader CNC Fanuc 21i TB Main spindle power 5.5 Kw Number of main spindle revolutions 6000 Turnable diameter 170 mm Turnable length 180 mm X 100 mm Z 220 mm U...

DAEWOO (DOOSAN) PUMA 300 LB with Iemca Automata Loader

• Manufacturer: Doosan
• Model: PUMA 300LB

DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe CNC Fanuc 18T Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy

PAMA AP 130 M CNC FLOOR TYPE BORER

• Manufacturer: Pama

Retrofitted in 2005. Complete with: - rotary table Stanko PS 2 - 2.500 x 2.000 mm.; capacity 12 tons.; travel 1.200 mm.; weight 12 tons.; d.r.o. 2 axis - boring support - chipconveyor - levelling shoes

2010 Wasino - Amada G-07

• Manufacturer: Wasino
• Model: G07

Amada - Wasino G-07 lathe with gang type turret CNC Fanuc Version 21i TB Spindle RPM 6000 Turnable dia 100mm L max turning 100mm Portal loader (gantry) with stocker The machine is under power in our warehouse ...

2001 EMAG VSC 400

• Manufacturer: Emag
• Model: VSC 400

EMAG VSC400 CNC vertical lathe, inverted spindle swing diameter 420 mm turning height 150 mm Full C AXIS Spindle 3400 RPM / 750 Nm torque Control Sinumerik 840 D x-travel 850 mm z-travel 315 mm rapid speed 45/30...

Allen-Bradely SLC 500 1746 modules

• Manufacturer: Allen
• Model: SLC 500

Slc500 Allen-Bradley disassembled from a working machine and tested in laboratory. Has some scratch and used marks as photo. You can buy one or more modules. DISCOUNT if you buy an entire slot-rack with its mo...

SIRMU VSN 300 C CNC VERTICAL BORER

• Manufacturer: SIRMU

Complete with: - hydraulic self centering chuck Ø 3.000 mm. - "c" axis - 16 seats atc - vertical milling head - manual tilting milling head - tool and tool-holders - chipconveyor