Used controller in Lucerne, Switzerland

2007 HARDINGE QUEST 10/65

• Manufacturer: Hardinge
• Model: Quest 10/65

2000 TORNOS DECO 2000/13a

• Manufacturer: Tornos
• Model: Deco 2000
• Spindle bore: 13 millimeter

Number of axis total: 10 | Workpiece length max.: 180 mm | Internal spindle diameter: 13 mm | From: 100 t/min | Up to: 8000 t/min | Voltage 50 hz 3x: 400 Volt | Spindle motor: 2.2 kW | Total power required: 11 k...

2013 CAZENEUVE Optimax 360

• Manufacturer: Amutio - Cazeneuve
• Model: Optimax 360

Control manufacture: SIEMENS | Control manufacture model: Optica | Turning diameter over bed: 380 mm | Center height: 180 mm | Distance between centres: 700 mm | Turning diameter over cross slide: 200 mm | Hole...

2001 SCHAUBLIN 125 CCN-R

• Manufacturer: Schaublin
• Model: 125CCN

Control manufacture: FANUC | Control manufacture model: 18i | Turning diameter: 270 mm | Center height: 125 mm | Distance between centres: 600 mm | Turning length: 400 mm | Turning diameter over cross slide: 11...

NUMERICAL CONTROL CNC “ERI” TYPE 2 AXIS WITH CARRIAGE

Display LCD – Adaptation on Schaublin table

2015 OKUMA MULTUS U 4000-2SW 2000 Ref No: 50716

• Manufacturer: Okuma
• Model: Multus U4000
• Spindle bore: 112 millimeter

-Big Bore left spindle: Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6)

VOUMARD 400 CNC

• Manufacturer: Voumard
• Model: 400 CNC

Control: GE FANUC Series Oi Mate TD | Min. grinding diameter: 20 mm | Max. grinding diameter: 300 mm | Max. grinding depth: 300 mm | Max.workpiece length + steady: 1780 mm | Centre height: 300 / 430 mm | Longitu...

2001 VDF BOEHRINGER DUS 1000 ti

• Manufacturer: VDF - Boehringer
• Model: DUS1000TI

Control manufacture: Siemens | Control manufacture model: 810 D | Turning diameter over bed: 1000 mm | Center height: 500 mm | Distance between centres: 2000 mm | Turning diameter over cross slide: 700 mm | Hol...

2002 GILDEMEISTER NEF 320

• Manufacturer: Gildemeister
• Model: NEF 320

Control manufacture: HEIDENHAIN | Control manufacture model: Manual Plus | Number of axes: 2 | Turning diameter over bed: 212 mm | Distance between centres: 750 mm | Turning diameter over cross slide: 150 mm | ...

2000 TORNOS DECO 2000/13

• Manufacturer: Tornos
• Model: Deco 2000
• Spindle bore: 13 millimeter

Number of axis total: 10 | Workpiece length max.: 180 mm | Internal spindle diameter: 13 mm | From: 100 t/min | Up to: 8000 t/min | Voltage 50 hz 3x: 400 Volt | Spindle motor: 2.2 kW | Total power required: 11 k...

2002 SCHAUBLIN 180 CCN R-T

• Manufacturer: Schaublin
• Model: 180CCN R-T
• Spindle bore: 60 millimeter

Centre height: 275 mm | Distance between centres: 600 mm | Swing over cross-slide: 150 mm | Swing over bed: 600 mm | Turning length: 610 mm | Longitudinal travel (z-axis): 600 mm | Transversal strocke (x axis): ...

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

IKA KS 4000 i control

• Manufacturer: IKA
• Model: KS 4000

IKA KS 4000 i control. Incubation shaker with an innovative design for unattended operation in a temperature-controlled environment. Large LED display for speed and time settings. Control elements with antimicrob...

Hewlett Packard 7673 Controller

• Manufacturer: HP
• Model: 7673

Hewlett Packard Controller 7673, Model 18594B. Interfaces: Tray, COMM, Controller, Front and Rear Injector. 230 V, 50/60 Hz. In very good condition.

IKA RET control-visc

• Manufacturer: IKA
• Model: RET Basic

IKA RET control-visc. PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated scale. A clear, multilingual TFT display simplifies the setting of all parameters. An integrated temperature control...