Building Filters
- Trusted Seller
2019 AXILE V4
- Manufacturer: Axile
This 3-axis AXILE V4 vertical machining center was manufactured in 2019. It features a robust table size of 770 × 410 mm with a maximum load capacity of 400 kg. Equipped with a high-speed ISO40 spindle capable of...
Austria - Trusted Seller
Komptech Terminator 5200 E direct SL
- Manufacturer: Komptech
- Model: Terminator
AVAILABILITY: By agreement Offer creation via project coordinators / system engineering! Machine completely overhauled or completely rebuilt Terminator 5200 E direct SL Heating mats 400V 50Hz Siemens Profibus E...
Frohnleiten, Austria - Trusted Seller
2020 Pallet Carousel Double-Wall Production PREQAST-M24514
- Manufacturer: Vollert
Pallet Carousel Double-Wall Production Weckenmann, EBAWE, Filzmoser, RATEC, Unitechnik, SAA Further Dimensions: Consists of: STRIPPING AND LIFTING Lifting device for shell 1 + floor element (Weckenmann) CLEANING,...
Thalheim bei Wels, Austria - Trusted Seller
2007 Matec MATEC 30 HV/K
- Manufacturer: Matec
- Model: 30 HVK
This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum ...
Austria - Trusted Seller
2000 LINK SPZ, V30,V30,VS66,SW, NK260..
- Manufacturer: Linck
LINK V30 clamping line with trimming saw VS (round-run operation) The LINK V30 clamping line with integrated trimming saw VS is designed for continuous round-run operation and is particularly suitable for process...
Sallingberg, Austria - Trusted Seller
2005 STAMA MC 526/M
- Manufacturer: Stama
- Model: MC 526
- Power requirement: 36 kilowatt
This 7-axis STAMA MC 526/M was manufactured in 2005, featuring a Siemens Sinumerik 840 D control system. It includes a milling spindle with a speed of 10,500 rpm and a turning spindle speed of 5,000 rpm. The mach...
Austria - Trusted Seller
2022 DMG M1
- Manufacturer: DMG Mori
- Model: M1
This 3-axis DMG M1 vertical machining center was manufactured in 2022. It features a Siemens SINUMERIK One 828D control, a spindle speed of 12,000 rpm, and a table size of 850 x 650 mm supporting up to 600 kg. Eq...
Austria 
Cottage HH 40-12
- Manufacturer: Cottage
Rotary drive: Cottage HG 12 | Percussion: Krupp HB 30/40 | Optional: electro-hydraulic speed control | Rpm: Stage 2: 102 rpm - 5200 Nm
Vienna, Austria- Trusted Seller
2001 HAAS VCE 550
- Manufacturer: Haas
This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x ...
Austria - Trusted Seller
Komptech Flowfex 6900
- Manufacturer: Komptech
- Hours: 268 hour
AVAILABILITY: on request Flowfex 6900 including separate stationary dosing bunker (10 m³) 125A CEE coupling (125A / 400V 3-pole+N+PE) Bunker belt Tension shaft Fine-grain belt Fine-grain collection belt Oversiz...
Frohnleiten, Austria - Trusted Seller
2004 DMG Gildemeister GMX 400 linear
- Manufacturer: DMG Mori
This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spi...
Austria 
Handheld gun as glue and dowel inserter _ GANNOMAT Selekta
- Manufacturer: Gannomat
Dowel inserting machine with gun for simultaneous glue and dowel insertion. For professional and efficient dowel processing in furniture and framework. Short introduction: • Constant outstanding dowel length pro...
Austria
1998 Atlas Copco DCS-12-45-1 powerpack
- Manufacturer: Atlas-Copco
Operating hours: 9 | +: Control unit for hammer drill with hydraulic powerpack, water pump, compressor | Electric motor: 45 kW | Hydraulic pumps: 107 + 60 l/min.
Vienna, Austria
2003 Cheeks KL 65S-80.3 Eccentric Screw Pump (Mono Pump)
- Manufacturer: Wangen
Weight: 900kg | +: Cable remote control | Flow rate max.: 8 to 30 m³/h | Delivery pressure max.: 9 bar; briefly 16 bar | Electric motor: 22 kW with frequency converter
Vienna, Austria- Trusted Seller
2022 XYZprinting MfgPro230 xS
- Manufacturer: XYZprinting
This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Additio...
Austria 
Monforts DNC5 CNC Lathe
- Manufacturer: Monforts
- Model: DNC5
Good condition Monforts DNC5 CNC Lathes available between 1995 and 2004 years. Located in Austria and other countries. Click request price for more information.
Austria
